New convertor is in!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMR-PERFORMANCE · 06-12-2014, 06:48 PM

new 245 265 UFO convertor. Will have to see what it flashes to one the spray is on. Looking to move the 7.33 to a high 6.. hell I will take a 6.99 and do a jig

Its a whole new truck now its coming out the hole extremely hard now on the few test hits on motor only.

Marv D · 06-12-2014, 09:52 PM

Steve...
I think we need to start a support group for those addicted to the faster faster faster.
There was a thread here recently talking abou the $ wasted on this part and that change and the upgrade to .....

all I can say is

Hi, My name is Marv, and I have a Horsepower problem.

cableguy0 · 06-12-2014, 10:16 PM

I think most of us here understand. We need a church basement somewhere and some sponsors for our addiction. The only problem is none of us are trying to cure the addiction and we cant help but encourage each other.

We are all destined to be perpetually broke with shops full of parts worth 1/3 of what they cost new. Its about the stupidest possible way to "invest" money right up until you hit the loud pedal and the smile almost hurts.

71Dragtruck · 06-12-2014, 11:09 PM

There would be no reason why health benifits shouldn't help cover my addiction expenses.

Super73 · 06-13-2014, 02:17 AM

You are all welcome to come to my house and discuss your addiction to this sport. But please make sure to keep turning wrenches while you talk. I need to go faster and could use the labor

Steve, glad to here it is feeling better.

hotrod 80 · 06-13-2014, 05:33 AM

Nice converter . Im about to finish up a 72 hours week working nights and will be getting off work saturday morning , drag racing saturday and working sturday night . Add me to the addicted list .

GMR-PERFORMANCE · 06-13-2014, 05:10 PM

Well got everything ready to go, made some changes and the fuel pump is acting up.. New 175 GPH bypass pump. ITs not a electrical deal , it stopped I tapped it with my hand and if took off again. Not going to take the chance of spraying the engine with a faulty pump.. CHIT this sucks .. buts it covered under warranty.

Super73 · 06-13-2014, 05:29 PM

That does suck!

Marv D · 06-13-2014, 09:14 PM

Steve did you blow each and every line out after you assembled the hose ends? One stupid little piece os stray steel braid will really ruin you day under boost! I toe up a new Mallor 250 GHP alcohol pump because I was in too big of a hurry. And besides, the debris wouldn't possibly find its way into the pump!!!

Sorry for the delayed outting. It's too hot to race down there anyways isn't ti!

GMR-PERFORMANCE · 06-14-2014, 08:22 AM

Marv yes , the pump seems to have a issue with the brushes .. Oh well I needed to install a 90* shut off valve in the supply side anyways. Good time as any.. No it was 83 temp wise we had rain the day before..

71Dragtruck · 06-14-2014, 07:02 PM

Rain can suck it, loaded the truck in the trailer yesterday got up at 4am today and drove about 2hrs 45mins to get rained out, canceled for Sat and Sun, so canceled hotel room and drove another 2hrs to another track rained today but forecast looks good for tomorrow.

Parked the trailer at the track and got a room in the city for the night, hope to get some test passes in tomorrow. Anyway back on topic, hope the converter works for you, mine right now is way too loose for bottle, but will have to do for now, don't want to drop cash on a new one until the new motor build.

hotrod 80 · 06-15-2014, 12:03 PM

Quote:

Originally Posted by GMR-PERFORMANCE

Marv yes , the pump seems to have a issue with the brushes .. Oh well I needed to install a 90* shut off valve in the supply side anyways. Good time as any.. No it was 83 temp wise we had rain the day before..

Interested in how the 90* valve works out for you and what type you use . Been thinking one of these would be nice for fuel filter changes .

GMR-PERFORMANCE · 06-16-2014, 08:06 AM

As for a ball valve you can get fancy and buy Earls or that type of buy NPT stuff and run an adapter back to an fittings. I have not much room so I am not sure what I do .. I can post up pics

06-12-2014, 06:48 PM	#1
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	New convertor is in!!! new 245 265 UFO convertor. Will have to see what it flashes to one the spray is on. Looking to move the 7.33 to a high 6.. hell I will take a 6.99 and do a jig Its a whole new truck now its coming out the hole extremely hard now on the few test hits on motor only. Attached Images __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

06-12-2014, 09:52 PM	#2
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: New convertor is in!!! Steve... I think we need to start a support group for those addicted to the faster faster faster. There was a thread here recently talking abou the $ wasted on this part and that change and the upgrade to ..... all I can say is Hi, My name is Marv, and I have a Horsepower problem. __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

06-12-2014, 10:16 PM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: New convertor is in!!! I think most of us here understand. We need a church basement somewhere and some sponsors for our addiction. The only problem is none of us are trying to cure the addiction and we cant help but encourage each other. We are all destined to be perpetually broke with shops full of parts worth 1/3 of what they cost new. Its about the stupidest possible way to "invest" money right up until you hit the loud pedal and the smile almost hurts. __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

06-12-2014, 11:09 PM	#4
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: New convertor is in!!! There would be no reason why health benifits shouldn't help cover my addiction expenses. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

06-13-2014, 02:17 AM	#5
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: New convertor is in!!! You are all welcome to come to my house and discuss your addiction to this sport. But please make sure to keep turning wrenches while you talk. I need to go faster and could use the labor Steve, glad to here it is feeling better. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

06-13-2014, 05:33 AM	#6
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: New convertor is in!!! Nice converter . Im about to finish up a 72 hours week working nights and will be getting off work saturday morning , drag racing saturday and working sturday night . Add me to the addicted list . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

06-13-2014, 05:10 PM	#7
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: New convertor is in!!! Well got everything ready to go, made some changes and the fuel pump is acting up.. New 175 GPH bypass pump. ITs not a electrical deal , it stopped I tapped it with my hand and if took off again. Not going to take the chance of spraying the engine with a faulty pump.. CHIT this sucks .. buts it covered under warranty. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

06-13-2014, 05:29 PM	#8
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: New convertor is in!!! That does suck! __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

06-13-2014, 09:14 PM	#9
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: New convertor is in!!! Steve did you blow each and every line out after you assembled the hose ends? One stupid little piece os stray steel braid will really ruin you day under boost! I toe up a new Mallor 250 GHP alcohol pump because I was in too big of a hurry. And besides, the debris wouldn't possibly find its way into the pump!!! Sorry for the delayed outting. It's too hot to race down there anyways isn't ti! __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

06-14-2014, 08:22 AM	#10
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: New convertor is in!!! Marv yes , the pump seems to have a issue with the brushes .. Oh well I needed to install a 90* shut off valve in the supply side anyways. Good time as any.. No it was 83 temp wise we had rain the day before.. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

06-14-2014, 07:02 PM	#11
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: New convertor is in!!! Rain can suck it, loaded the truck in the trailer yesterday got up at 4am today and drove about 2hrs 45mins to get rained out, canceled for Sat and Sun, so canceled hotel room and drove another 2hrs to another track rained today but forecast looks good for tomorrow. Parked the trailer at the track and got a room in the city for the night, hope to get some test passes in tomorrow. Anyway back on topic, hope the converter works for you, mine right now is way too loose for bottle, but will have to do for now, don't want to drop cash on a new one until the new motor build. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

06-16-2014, 08:06 AM	#13
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: New convertor is in!!! As for a ball valve you can get fancy and buy Earls or that type of buy NPT stuff and run an adapter back to an fittings. I have not much room so I am not sure what I do .. I can post up pics __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.