Cleaning Gas Tanks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 Suburban · 01-08-2004, 03:56 PM

Anyone know of a good way to clean out a gas tank that has had gas sitting in it for 15 years? I know I could take it and have it boiled out, but I was wondering if there is any method of cleaning it up at home. I have all ready syphoned the old gas out. Thanks

**smitty62** · 01-08-2004, 04:01 PM

Soak it in denatured alcohol

68 Suburban · 01-08-2004, 04:07 PM

Thanks, Now where can you get that in bulk....lol

**smitty62** · 01-08-2004, 04:29 PM

Lowe's, Home Depot, etc in the paint area. Not cheap, but you only need couple of gallons.

cdowns · 01-08-2004, 05:20 PM

for the price of a couple of gallons of alcahol , just take it to the radiator guy and have him boil it out and pressure test it and you don't have the mess to clean up and dispose of and you get a far superior job IMO

*67Fleetsidedream* · 01-08-2004, 05:31 PM

If I had to do it again, I would buy the POR 15 kit. I used it on my tank and have had excellent results. Most likely it is going to have rust sediment on the bottom of the tank and the kit from Por 15 will have a degreaser, cleaner and a sealer.

Longhorn Man · 01-08-2004, 11:27 PM

I used the POR on mine, works awsome.
I steam cleaned mine out for a few hrs first...not a speck of rust left in there.
I also had the leak in the filler neck repaired while it was out.

68 Suburban · 01-09-2004, 01:08 AM

I dropped the tank and there was some much crap in there, I am going to have it boiled out. Anyone have a link to this POR 15 stuff?

spencra · 01-09-2004, 01:23 AM

Hey 68 suburban, so much for syphoning your tank with mouth and hose, you had to drop the tank anyways

Alexis · 01-09-2004, 01:24 AM

http://www.por15.com/

*rcorkren* · 01-09-2004, 01:59 AM

POR 15 kit is good, but it takes a lot of shaking the tank and the better you are at getting all the crap out first the better the results.

It takes some time... but you'll be happy.

68 Suburban · 01-09-2004, 08:21 PM

I dropped the tank and took it in to a radiator shop to get it boiled out. $45, not bad

Monday afternoon, I will have a clean tank to hook back up and take this Mopar for a long ride

01-08-2004, 03:56 PM	#1
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Cleaning Gas Tanks Anyone know of a good way to clean out a gas tank that has had gas sitting in it for 15 years? I know I could take it and have it boiled out, but I was wondering if there is any method of cleaning it up at home. I have all ready syphoned the old gas out. Thanks

01-08-2004, 04:01 PM	#2
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Soak it in denatured alcohol __________________ Stepsides look like real trucks! Smitty

01-08-2004, 04:29 PM	#4
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Lowe's, Home Depot, etc in the paint area. Not cheap, but you only need couple of gallons. __________________ Stepsides look like real trucks! Smitty

01-08-2004, 05:20 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	for the price of a couple of gallons of alcahol , just take it to the radiator guy and have him boil it out and pressure test it and you don't have the mess to clean up and dispose of and you get a far superior job IMO __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-09-2004, 01:23 AM	#9
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Hey 68 suburban, so much for syphoning your tank with mouth and hose, you had to drop the tank anyways __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

01-08-2004, 04:07 PM	#3
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Thanks, Now where can you get that in bulk....lol

01-08-2004, 05:31 PM	#6
67Fleetsidedream Wiseass secured himself a BAN Join Date: Nov 2000 Location: MOON!!! Posts: 2,282	If I had to do it again, I would buy the POR 15 kit. I used it on my tank and have had excellent results. Most likely it is going to have rust sediment on the bottom of the tank and the kit from Por 15 will have a degreaser, cleaner and a sealer.

01-08-2004, 11:27 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I used the POR on mine, works awsome. I steam cleaned mine out for a few hrs first...not a speck of rust left in there. I also had the leak in the filler neck repaired while it was out.

01-09-2004, 01:08 AM	#8
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	I dropped the tank and there was some much crap in there, I am going to have it boiled out. Anyone have a link to this POR 15 stuff?

01-09-2004, 01:24 AM	#10
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	http://www.por15.com/

01-09-2004, 01:59 AM	#11
rcorkren Account Suspended Join Date: Jun 2003 Location: Houston, Texas Posts: 43	POR 15 IS GREAT POR 15 kit is good, but it takes a lot of shaking the tank and the better you are at getting all the crap out first the better the results. It takes some time... but you'll be happy.

01-09-2004, 08:21 PM	#12
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	I dropped the tank and took it in to a radiator shop to get it boiled out. $45, not bad Monday afternoon, I will have a clean tank to hook back up and take this Mopar for a long ride



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.