|
06-18-2014, 03:40 PM
|
#1 |
|
Registered User
Join Date: Jun 2014
Location: Tacoma, Washington
Posts: 1
|
Hood strip fitment
Got a repop hood divider strip for my 1951 GMC. Never checked to make sure it fit properly like an ass. Then the truck and parts went to paint. Strip seems to be 1/4" too long!! Any tips or ideas getting it to fit without cutting? Thanks
|
|
|
|
06-18-2014, 05:32 PM
|
#2 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,413
|
Re: Hood strip fitment
If you are running the hood ornament you might shorten it behind the hood ornament.
You could cut it and slip a piece of flat stock in the ends of the cut to line them up and not have to deal with paint that way. That's if you can get away with taking the quarter inch out right there without causing problems. Other wise it is cut, weld and repaint.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
