Set The Longhorn Bed On The C-30 Dually Today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 06-25-2014, 10:16 PM

-
I picked up a Longhorn bed from Ryan (Dieselwrencher) yesterday and I needed to get it off of my trailer, so I went ahead and set it on the ’67 C-30. I wasn’t quite ready for it but I didn’t want to put it on the ground. I fits really good and looks like it belongs on there. I have wanted to do this ever since I saw 72freaks conversion a few years ago. I have a couple of other projects to finish before I can get serious about working on this one though.

LockDoc

MYGMCANDME · 06-25-2014, 10:30 PM

That looks so cool! I have been wanting to do that to my '70 GMC one ton for a long time. Are you going to put the stepside fenders on it or leave it like that? I like it. Keep us updated on your progress. Thanks.

**LockDoc** · 06-25-2014, 10:49 PM

Quote:

Originally Posted by MYGMCANDME

That looks so cool! I have been wanting to do that to my '70 GMC one ton for a long time. Are you going to put the stepside fenders on it or leave it like that? I like it. Keep us updated on your progress. Thanks.

Thanks.

No fenders on this one The tires just barely stick out. I do have to widen the inner wheel tubs to clear the inside duals though....

LockDoc

sduckworth13 · 06-25-2014, 10:59 PM

That's a nice looking bed Leon. I have wanted a Longhorn ever since I seen Ryan's at the truck nationals.

**LockDoc** · 06-26-2014, 07:56 AM

Quote:

Originally Posted by sduckworth13

That's a nice looking bed Leon. I have wanted a Longhorn ever since I seen Ryan's at the truck nationals.

Thanks Scott. It's a pretty nice bed for Iowa. I think it has been rebuilt at some point in it's life....

LockDoc

**Ol Blue K20** · 06-26-2014, 08:11 AM

Looks good Leon, it looks like it belongs. ...

**Dieselwrencher** · 06-26-2014, 03:19 PM

It sure looks great on there Leon! I can't wait to see the end result!

rambler · 06-26-2014, 03:29 PM

that looks great..

**LockDoc** · 06-26-2014, 04:01 PM

-
Thanks fellas. I'm really itchin' to get to work on it. Can't wait to drop the engine and trans in it. Vroom-Vroom...

LockDoc

T3AMCH3VY · 06-26-2014, 06:29 PM

C-truck noob here

What is a long horn bed??
cool project though

Scorp · 06-26-2014, 06:34 PM

Do away with the dually and put a super single under it.

**LockDoc** · 06-26-2014, 06:38 PM

Quote:

Originally Posted by T3AMCH3VY

C-truck noob here

What is a long horn bed??
cool project though

The Longhorn bed is 8' 6" long. If you look close you can see the seam back about 6" from the front of the bed. They fit the C-30 133" wheel base chassis without any modification.

LockDoc

**LockDoc** · 06-26-2014, 06:40 PM

Quote:

Originally Posted by Scorp

Do away with the dually and put a super single under it.

Having the dually is the whole reason for doing it for me....

LockDoc

jec · 06-26-2014, 09:32 PM

Here's mine before, during, and after 8 year restoration!!!

jec · 06-26-2014, 09:48 PM

Oh yeah, factory lower side toolbox too!!!

**LockDoc** · 06-26-2014, 10:20 PM

Quote:

Originally Posted by jec

Here's mine before, during, and after 8 year restoration!!!

Quote:

Originally Posted by jec

Oh yeah, factory lower side toolbox too!!!

You did an amazing job on that bed. I doubt mine will ever look that nice but I plan on hauling a lot of stuff with mine... Sometimes I'm not too nice to my trucks...

LockDoc

**Dieselwrencher** · 06-27-2014, 02:53 PM

Leon, i'm surprised the white matches so well from the cab to the box.

Yeah, leave it a dually for sure!

**Dieselwrencher** · 06-27-2014, 02:54 PM

Quote:

Originally Posted by jec

Oh yeah, factory lower side toolbox too!!!

JEC, nice Longhorn! Did you convert it to four wheel drive, or was it done before you got the truck?

**LockDoc** · 06-27-2014, 10:03 PM

Quote:

Originally Posted by Dieselwrencher

Leon, i'm surprised the white matches so well from the cab to the box.

Yeah, leave it a dually for sure!

Too bad the cab isn't in better shape, I wouldn't even have to paint it....

LockDoc

p.s. Tell Nick I have his lock done.

jec · 06-27-2014, 10:21 PM

Hey dieselwrencher,

It was done but I did have to clean-up some shoddy workmanship on the shackle holes. See post titled "4x4 conversion" below.

http://67-72chevytrucks.com/vboard/s...d.php?t=633837

I posted some comments and a picture on that thread.

06-25-2014, 10:16 PM	#1
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,116	Set The Longhorn Bed On The C-30 Dually Today - I picked up a Longhorn bed from Ryan (Dieselwrencher) yesterday and I needed to get it off of my trailer, so I went ahead and set it on the ’67 C-30. I wasn’t quite ready for it but I didn’t want to put it on the ground. I fits really good and looks like it belongs on there. I have wanted to do this ever since I saw 72freaks conversion a few years ago. I have a couple of other projects to finish before I can get serious about working on this one though. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 06-25-2014 at 10:46 PM.

06-25-2014, 10:30 PM	#2
MYGMCANDME Registered User Join Date: Mar 2008 Location: BOWLING GREEN, KY Posts: 115	Re: Set The Longhorn Bed On The C-30 Dually Today That looks so cool! I have been wanting to do that to my '70 GMC one ton for a long time. Are you going to put the stepside fenders on it or leave it like that? I like it. Keep us updated on your progress. Thanks.

06-25-2014, 10:59 PM	#4
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Set The Longhorn Bed On The C-30 Dually Today That's a nice looking bed Leon. I have wanted a Longhorn ever since I seen Ryan's at the truck nationals. __________________ Scott

06-26-2014, 08:11 AM	#6
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,389	Re: Set The Longhorn Bed On The C-30 Dually Today Looks good Leon, it looks like it belongs. ... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

06-26-2014, 03:19 PM	#7
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Set The Longhorn Bed On The C-30 Dually Today It sure looks great on there Leon! I can't wait to see the end result! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-26-2014, 03:29 PM	#8
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: Set The Longhorn Bed On The C-30 Dually Today that looks great.. __________________ No matter where you are..... There you are... Buckaroo Banzi

06-26-2014, 04:01 PM	#9
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,116	Re: Set The Longhorn Bed On The C-30 Dually Today - Thanks fellas. I'm really itchin' to get to work on it. Can't wait to drop the engine and trans in it. Vroom-Vroom... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

06-26-2014, 06:29 PM	#10
T3AMCH3VY Registered User Join Date: May 2014 Location: Anderson South Carolina Posts: 14	Re: Set The Longhorn Bed On The C-30 Dually Today C-truck noob here What is a long horn bed?? cool project though

06-26-2014, 06:34 PM	#11
Scorp Online Painter Join Date: Jul 2006 Location: Topeka, Kansas Posts: 413	Re: Set The Longhorn Bed On The C-30 Dually Today Do away with the dually and put a super single under it.

06-26-2014, 09:32 PM	#14
jec Registered User Join Date: May 2000 Location: Middletown, Ohio Posts: 131	Re: Set The Longhorn Bed On The C-30 Dually Today Here's mine before, during, and after 8 year restoration!!! Attached Images

06-26-2014, 09:48 PM	#15
jec Registered User Join Date: May 2000 Location: Middletown, Ohio Posts: 131	Re: Set The Longhorn Bed On The C-30 Dually Today Oh yeah, factory lower side toolbox too!!! Attached Images

06-27-2014, 02:53 PM	#17
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Set The Longhorn Bed On The C-30 Dually Today Leon, i'm surprised the white matches so well from the cab to the box. Yeah, leave it a dually for sure! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-27-2014, 10:21 PM	#20
jec Registered User Join Date: May 2000 Location: Middletown, Ohio Posts: 131	Re: Set The Longhorn Bed On The C-30 Dually Today Hey dieselwrencher, It was done but I did have to clean-up some shoddy workmanship on the shackle holes. See post titled "4x4 conversion" below. http://67-72chevytrucks.com/vboard/s...d.php?t=633837 I posted some comments and a picture on that thread.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.