Any pics of spot welds on the bed

[Ernie76]

Hi im taking my bed apart...im trying to locate the spot welds
I know theres a ton of bolts to unbolt

Thanks in advance

[Nukes16]

Not really sure what you mean. The box has no welds connecting the panels. It can simply be unbolted.

[Ernie76]

I was told it has spot welds on the rear by the tailgate but cant seem to find them

[Nukes16]

Not that I recall. Just the bolts and the seam sealer hold everything together. I didn't have to cut or grind anything.

[Ernie76]

Ill check that then cause I have to replace the driver side

[Nukes16]

It does tuck and fold in a couple of spots near the inner bolts at the back but that's all. Good luck.

[Ernie76]

Ive already took out the bolts and ive try wiggle it back and forth and doesnt come out

[Nukes16]

There are some hidden bolts underneath and inside. They are difficult to see.

[Ernie76]

Ive already check and couldnt find any more
but ill keep trying

[Desperado454]

Pretty sure there's a weld where i drew the arrow, been awhile since i took mine off.

[Ernie76]

Oh ok thank you...it looks like its in the inside not the outer part

[bigblock73]

Originally Posted by Nukes16

Not really sure what you mean. The box has no welds connecting the panels. It can simply be unbolted.

There are two spot welds at the rear of the bed, where the stake pocket channel meets the bed floor.

[bigblock73]

Here is a scan of an article on my site...step 9

http://73-87.com/7387garage/exterior.../bolton_04.jpg

[Ernie76]

Oh ok thanks I see they are by where the tailgate enters next to it