The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical > Truck Audio

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-16-2014, 06:06 PM   #1
Jb70c10
Registered User
 
Join Date: Jan 2014
Location: TX
Posts: 181
Wire routing

How are all of you routing your wires from your battery to your amp mounted behind the seat? If you come thru an opening in the firewall do you route the wire along the outside of the cab in that little channel where the dome light wire runs or just across the cab floor under the carpet? Cab floor I'd cover with dynamite type material. Just want to know what the best way to route the big 4 ga wire to where is does not show and won't cause a big lump in the carpet
Jb70c10 is offline   Reply With Quote
Old 07-03-2014, 10:38 AM   #2
Underwoj
Registered User
 
Join Date: Oct 2013
Location: waxahachie
Posts: 67
Re: Wire routing

hey there -

you are correct...just got done with my audio install and this is exactly what I did. I have an amp located under the driver side and a powered sub under the passenger. the power cables for the amp and sub I ran to along/in the channel on the pass side and all the audio cables went thru the other side - worked out great. drilled a couple hole up and behind the glovebox for those power cables.

hope this helps...
Underwoj is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com