CA 72 Blazer part out

[Dale99]

Still in for section of cab floor

[rkgjl]

That wasn't me interested in the cab floor

[budnikguy]

I believe so, I will confirm for you tomorrow...

Originally Posted by rkgjl

Hi just wondering if you have the windshield washer spray nozzles would be interested in them

[budnikguy]

Yes sir, getting close to cutting time!!

Originally Posted by Dale99

Still in for section of cab floor

[Dale99]

ok, I didnt see anything that had confirmed you saw my post. Plus letting you know I was still interested.

[budnikguy]

all brackets removed....the floor mounted passenger side rear was a fight, it is a throw in since it is damaged. I have a majority of the screws that will be included also. LMK

Originally Posted by JimH2828

Any progress with tearing her down?

1) Rear side panel mount brackets
- center top hat bracket type (there should be 6x)
- floor and tailgate L bracket type (there should be 6x)
2) Firewall to rear wire harness
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

[1972 Jimmy]

If JimH2828 passes, I'm still interested in the brackets.
Thanks,
Eric

Originally Posted by budnikguy

all brackets removed....the floor mounted passenger side rear was a fight, it is a throw in since it is damaged. I have a majority of the screws that will be included also. LMK

[IronCanine]

Originally Posted by budnikguy

I have posted more pics of the floor, I would need $80 shipped for your cut.lmk

Thanks
Adam

Sorry I missed this. Definitely still in. PM payment info. Thanks.

Brad

[JimH2828]

Sounds like some of the other guys need the rear panel brackets more than I do, so I'll pass on those and let someone else grab them. I am still interested in the cab to rear wire harness and rear bench hold down depending on price. Let me know.

Thanks
Jim

[MrGoodpliers]

Still interested in rocker boxes...

[Maineviking]

do you have any pics of whats left? im interested in the rear floor section from behind the front seat brackets back. maybe an underside pic also? thanks.

[tdkosta]

Originally Posted by tdkosta

No I don't need it to wrap around and include the taillight, just up to the edge is fine.

Still in for when you are ready to cut. Thanks

[1972 Jimmy]

Originally Posted by budnikguy

all brackets removed....the floor mounted passenger side rear was a fight, it is a throw in since it is damaged. I have a majority of the screws that will be included also. LMK

Adam,
Am I next inline for the interior panel stand offs? If so please send me a PM with cost
Thanks Eric

[Sandemonium]

Originally Posted by JimH2828

Sounds like some of the other guys need the rear panel brackets more than I do, so I'll pass on those and let someone else grab them. I am still interested in the cab to rear wire harness and rear bench hold down depending on price. Let me know.

Thanks
Jim

Adam,

If I am next in line for panel stands and brackets I am going to pass. I already found what I was looking for.

Thank you,
Bob

[Dale99]

If you still have the gravel guards for the rear bumper, I will take them with my section of floor pan also.

[K5Rodder]

Any other blazer tubs or rollers there in this year style? After I finish the couple I have here I would love to do one that style. Have a couple of trucks I can snatched parts from for it.

[K5Rodder]

Still have the windshield frame?

[IronCanine]

Adam,

Have you cut up the bed on this yet? You hadn't responded to my most recent posts or PMs. I am still interested in that floor section as previously outlined if possible.

Thanks,

Brad

[Dale99]

I no longer need the drivers floor section.