repainting a console

[BobbyK]

The minor cracks in the cup holder were fixed with J.B. weld.

The MAJOR hole and crack you see were too big for J.B. weld so I got some galvinized sheet metal,cut it and bent it so it followed the contour of the bottom and inside of the console.

I then rivited it in place sandwiching the orig. console bottom between the two sheets of metal.

I then sprayed it with the SEM dye/paint.
Here I've bent up the sheet meatal to conform to the bottom of the console.


Bottom done.


Here's the metal plate I cut up for the inside.


I've painted it here with the SEM dye/paint.You can JUST see the rivits I used to attach the two metal sheets together.