07-13-2014, 10:59 AM | #1 |
Registered User
Join Date: Jan 2012
Location: Phoenix, Arizona
Posts: 500
|
What is it?
What is it? and what should it look like?
Any thing would help! |
07-13-2014, 11:12 AM | #2 |
Registered User
Join Date: Apr 2011
Location: Klein Texas
Posts: 3,852
|
Re: What is it?
Shifter stuff at the automatic transmission, The bent up thing with the point bolts to the frame, the other piece bolts to the transmission shift shaft
__________________
My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe |
07-13-2014, 11:14 AM | #3 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
|
Re: What is it?
Yup. Looks to have been in a serious accident LOL! Auto trans linkage.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
07-13-2014, 11:54 AM | #4 |
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,847
|
Re: What is it?
Here are 3 pictures from my teardown that should help. This is on a TH400.
|
07-13-2014, 03:20 PM | #5 |
Registered User
Join Date: Jan 2012
Location: Phoenix, Arizona
Posts: 500
|
Re: What is it?
Thanks, The wreck it was in sheered the transmision mount off of the frame not the trans housing. Anyway does any one have any dimentions for these parts? Exspecialy the one with the twists, don't know that it will bend back without braking. If i could get the measurement from bolt hole to bolt hole would help.
Last edited by desertnick69; 07-13-2014 at 03:31 PM. Reason: add picture |
07-13-2014, 03:35 PM | #6 |
Registered User
Join Date: Jan 2012
Location: Phoenix, Arizona
Posts: 500
|
Re: What is it?
Should this be striaght?
|
07-13-2014, 05:16 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,847
|
Re: What is it?
Quote:
Here's another shot showing the nuts on the 2 bolts that retain the bracket to the frame. It's a 3/4 ton if that matters. Last edited by FirstOwner69; 07-13-2014 at 05:25 PM. |
|
07-13-2014, 05:17 PM | #8 |
Senior Member
Join Date: May 2010
Location: Wisconsin & Arizona
Posts: 4,847
|
Re: What is it?
Yes. The surface with the notches should be parallel with the surface with the hole.
Last edited by FirstOwner69; 07-13-2014 at 05:25 PM. |
07-13-2014, 06:11 PM | #9 |
Registered User
Join Date: Jan 2012
Location: Phoenix, Arizona
Posts: 500
|
Re: What is it?
|
Bookmarks |
|
|