MO Complete ECE/Moog/CPP Steering Setup

[lchall]

Just as in my 4/6 drop kit ad decided to change over to an air ride setup and am selling a complete front steering setup comprised of Early Classic Enterprises, MOOG, and CPP components. Kit has never been driven, but was completely installed on a rolling chassis. Being installed there are a very few small chips/scratches that I can touch up before shipping, but setup is really in excellent condition. Setup has all components basically from end of steering column to the spindles. Purchased for a 72 truck, but I think everything is pretty much universal except the tie rod ends.

Here's a list of the parts. I tried to layout the picture kinda similar to how the steering would mount to your truck.

Early Classis Enterprises Components

• Quick Ratio Steering Gearbox w/ Rag Joint

MOOG Components

• Idler Arm
• Pitman Arm
• Inner Tie Rod Ends
• Outer Tie Rod Ends

CPP Components

• Billet Tie Rod Adjusting Sleeves
• Steering U-Joint 3/4-36 x 3/4 DD
• Nickel Plated Steering Shaft
• Intermediate Shaft And Flange

Setup also includes stock center link and idler arm support. Both are powdercoated in a low gloss black finish.

ECE steering box and MOOG components have been painted with Eastwood products. Painted with their self etching primer, spray gray paint, and diamond clear in a satin finish.

To be honest the CPP Billet Tie Rod Adjusting Sleeves paint/coating has really faded a lot in a short period of time. Just the finish from the factory, not sure what the deal is. I can media blast for you to finish as you like or I also have the new MOOG adjusting sleeves I can swap out and reduce the price a little.

Asking $575 plus shipping. Kit has been listed locally as well. Looking to sell as a complete package and not to separate any components at this time.

[lolife99]

What year centerlink?
Your tie rods will be 71-72 specific,... meaning they only fit a 71-72 centerlink and a 71-72 spindle.

[lchall]

Originally Posted by lolife99

What year centerlink?
Your tie rods will be 71-72 specific,... meaning they only fit a 71-72 centerlink and a 71-72 spindle.

The center link came out of a 72 truck. Basically its setup for a 71-72, but if someone purchased all of it I think they should be good to go as long as they have the 71-72 spindles.

[hvacfatboy]

what kind of price with the moog adjusting sleeves shipped to 27583 I am interested in this setup

[lchall]

Originally Posted by hvacfatboy

what kind of price with the moog adjusting sleeves shipped to 27583 I am interested in this setup

PM sent

[hvacfatboy]

I am going to pass I discovered I had almost everything already except the steering box and shaft. If you decide to separate let me know thanks

[lchall]

Originally Posted by hvacfatboy

I am going to pass I discovered I had almost everything already except the steering box and shaft. If you decide to separate let me know thanks

Ok, will do. By shaft did you mean the u-joint/shaft/flange pieces?

[hvacfatboy]

u joint and flange shaft and the long black shaft that goes left to right in the picture. Sorry about the description cant think of proper name this morning.

[lchall]

Originally Posted by hvacfatboy

u joint and flange shaft and the long black shaft that goes left to right in the picture. Sorry about the description cant think of proper name this morning.

Do you mean these parts?

[10.5stang]

If you will do 575.00 shipped to Oklahoma I will take it. I can PayPal you the funds. Thanks Matt

[Number98]

What would you need for the ECE steering box?

[lchall]

Originally Posted by 10.5stang

If you will do 575.00 shipped to Oklahoma I will take it. I can PayPal you the funds. Thanks Matt

PM Sent

[10.5stang]

Funds sent by way of PP.

[lchall]

Originally Posted by 10.5stang

If you will do 575.00 shipped to Oklahoma I will take it. I can PayPal you the funds. Thanks Matt

Originally Posted by 10.5stang

Funds sent by way of PP.

Payment received. All parts sold to 10.5stang.

Thanks everyone for you interest - Chad