how much to lay 22's on 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy_68 · 01-14-2004, 02:16 AM

how much would i have to notch the rear to lay my 67 on 22's. I was thinking around 10 inch. but just want to be sure. Thanx

Crank · 01-14-2004, 02:40 AM

Well ya gotta consider different things, is the frame gonna lay or is just the body? Cuz u can body drop the thing and it'd make the notch bigger, but wouldnt really notice, cuz the frame would be lower....Ur gonna need some triple bellowed or whatever bags, or some cylinders back there, that's a lot of lift for bags.
Brandon

Chevy_68 · 01-14-2004, 02:43 AM

well its gonna lay frame i already z'd the front 3inches and just need to notch back, wich sets the rockers about an 1 or half an 1inch when it lays out

Crank · 01-14-2004, 02:57 AM

Well if it's gonna lay the front of the frame, easy to just look and see if the rear is even where the front is gonna touch. Then, ur gonna need to take the radius of the wheel/tire and that's around how big the notch is gonna have to be, like 14 inches? Cuz you gotta allow a lil for the bumpstop and the axle. maybe about 12-14... not sure.
Brandon

01-14-2004, 02:16 AM	#1
Chevy_68 Registered User Join Date: Mar 2002 Location: PHX Az Posts: 155	how much to lay 22's on 67 how much would i have to notch the rear to lay my 67 on 22's. I was thinking around 10 inch. but just want to be sure. Thanx

01-14-2004, 02:40 AM	#2
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Well ya gotta consider different things, is the frame gonna lay or is just the body? Cuz u can body drop the thing and it'd make the notch bigger, but wouldnt really notice, cuz the frame would be lower....Ur gonna need some triple bellowed or whatever bags, or some cylinders back there, that's a lot of lift for bags. Brandon

01-14-2004, 02:43 AM	#3
Chevy_68 Registered User Join Date: Mar 2002 Location: PHX Az Posts: 155	well its gonna lay frame i already z'd the front 3inches and just need to notch back, wich sets the rockers about an 1 or half an 1inch when it lays out

01-14-2004, 02:57 AM	#4
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Well if it's gonna lay the front of the frame, easy to just look and see if the rear is even where the front is gonna touch. Then, ur gonna need to take the radius of the wheel/tire and that's around how big the notch is gonna have to be, like 14 inches? Cuz you gotta allow a lil for the bumpstop and the axle. maybe about 12-14... not sure. Brandon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.