KS Parting 72 GMC 1/2 ton sierra grande big block - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snipescastle2 · 07-20-2014, 11:28 AM

Randy,
I'm looking for a pretty rust free front bed panel for a steel fleetside bed, happen to have one? Mine is straight, but has quite a bit rust pin holes coming through the rounded tube at the top of it, that will probably burn through if I try and weld it......
Thanks!
Ben

**Cash3481** · 07-20-2014, 11:37 AM

Hey Randy,
Can you tell me a shipped price on the 3 BB hangers to 67110?
Mike

burb71 · 07-20-2014, 03:35 PM

Randy I now need the Oil pressure copper tubing and all brass fittings to set up on a Big Block Truck, from Gauge to engine?

Also the radio antenna if working, if its not bent or the the wire/plug is not cut.

Also can I buy the tower clamp thats in the post #32 on the fuel filler hose?

teeitup · 07-20-2014, 04:49 PM

Ben, sorry none right now

Mike, I need to give 70stovebolt first shot at them, he asked in thread and I told him I needed to get them off $38 shipped for the 3, I will pm him and find out

Steve, I have the BB oil line and fittings for $28 shipped, none of the other stuff right now

Thanks Randy

**70STOVEBOLT** · 07-20-2014, 05:41 PM

Randy, I will pass the BB exhaust hangers to Mike. Thanks for posting pic.

Thanks,
Mark

burb71 · 07-20-2014, 05:49 PM

Quote:

Originally Posted by teeitup

Ben, sorry none right now

Mike, I need to give 70stovebolt first shot at them, he asked in thread and I told him I needed to get them off $38 shipped for the 3, I will pm him and find out

Steve, I have the BB oil line and fittings for $28 shipped, none of the other stuff right now

Thanks Randy

Ok, Ill take the oil pressure lines & fitting.

teeitup · 07-20-2014, 05:58 PM

No problem Mark, Thanks

Steve, BB oil pressure line is yours

Mike, your up on the BB hangers

Thanks Randy

burb71 · 07-20-2014, 05:59 PM

Payment Sent for Oil lines & Fittings

teeitup · 07-20-2014, 06:26 PM

mailing out Mon Steve, THANKS!!!!!!!!

**Cash3481** · 07-20-2014, 10:07 PM

Quote:

Originally Posted by teeitup

No problem Mark, Thanks

Steve, BB oil pressure line is yours

Mike, your up on the BB hangers

Thanks Randy

Randy,
Sorry it must have been way back there! I apologize to mark for stepping in on his purchase. I'll take it since he passed but I will pay better attention in the future. Send me you payment preference.
Mike

**Cash3481** · 07-20-2014, 11:00 PM

Quote:

Originally Posted by Cash3481

Randy,
Sorry it must have been way back there! I apologize to mark for stepping in on his purchase. I'll take it since he passed but I will pay better attention in the future. Send me you payment preference.
Mike

Payment sent!
Mike

crushing · 07-21-2014, 04:01 PM

Hey Randy do u have a throttle cable and bracket for a 72 with a 350? If so what is price shipped to Tallahassee, FL 32312

teeitup · 07-21-2014, 05:01 PM

Mike, I'll get in mail Tues

crushing, sorry no individual ones right now

Thanks Randy

Brave71 · 07-22-2014, 04:18 PM

Randy I'm looking for nice set of vent windows for my 71...would prefer black..thanks

Jake1971 · 07-22-2014, 07:26 PM

Randy, interested in the stainless steel window visors in post #2, picture #5, total with shipping to 78602. LMK when to *SMASH* the Paypal button for you again.

Roscoep · 07-22-2014, 09:13 PM

I need an ash tray mounting bracket for 71 C10. Somewhere in my build I have misplaced mine.

Thanks,
Robert

teeitup · 07-22-2014, 09:46 PM

Brave71, I have a couple sets out there, I'll check condition and get pics Wed after work

Jake1971, Paul, I have them sold already, sorry

Robert, sorry none right now

Thanks Randy

teeitup · 07-23-2014, 07:50 PM

Brave71, this is the only set I have, they are stock tint but the rubber seal are weathered

Blue GMC · 07-23-2014, 08:33 PM

Randy

how much for the headlight bezels and is that the only tailgate you have right now. Dont worry about shipping I can pick up

teeitup · 07-23-2014, 08:42 PM

sold the headlight bezels already, and yes this is the only gmc gate I have right now. Thanks Randy

Brave71 · 08-07-2014, 06:51 PM

Randy, sorry I didn't get back to you on the black vent windows,family issues,I have decided to go with chrome ones for my 71. Do you have a good set of chrome ones? Thanks

teeitup · 08-07-2014, 10:57 PM

I just hauled in 5 trucks I will see if any are any good on them, Thanks

07-20-2014, 11:28 AM	#76
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy, I'm looking for a pretty rust free front bed panel for a steel fleetside bed, happen to have one? Mine is straight, but has quite a bit rust pin holes coming through the rounded tube at the top of it, that will probably burn through if I try and weld it...... Thanks! Ben

07-20-2014, 11:37 AM	#77
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 72 GMC 1/2 ton sierra grande big block Hey Randy, Can you tell me a shipped price on the 3 BB hangers to 67110? Mike

07-20-2014, 03:35 PM	#78
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy I now need the Oil pressure copper tubing and all brass fittings to set up on a Big Block Truck, from Gauge to engine? Also the radio antenna if working, if its not bent or the the wire/plug is not cut. Also can I buy the tower clamp thats in the post #32 on the fuel filler hose?

07-20-2014, 04:49 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block Ben, sorry none right now Mike, I need to give 70stovebolt first shot at them, he asked in thread and I told him I needed to get them off $38 shipped for the 3, I will pm him and find out Steve, I have the BB oil line and fittings for $28 shipped, none of the other stuff right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2014, 05:41 PM	#80
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,424	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy, I will pass the BB exhaust hangers to Mike. Thanks for posting pic. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-20-2014, 05:58 PM	#82
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block No problem Mark, Thanks Steve, BB oil pressure line is yours Mike, your up on the BB hangers Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2014, 05:59 PM	#83
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Parting 72 GMC 1/2 ton sierra grande big block Payment Sent for Oil lines & Fittings

07-20-2014, 06:26 PM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block mailing out Mon Steve, THANKS!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2014, 04:01 PM	#87
crushing Registered User Join Date: Nov 2012 Location: Tallahassee, FL Posts: 99	Re: Parting 72 GMC 1/2 ton sierra grande big block Hey Randy do u have a throttle cable and bracket for a 72 with a 350? If so what is price shipped to Tallahassee, FL 32312 __________________ 1972 Cheyenne (Major Project) 1993 Jeep Wrangler 2012 Ford F150 FX2 2012 GMC Yukon

07-21-2014, 05:01 PM	#88
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block Mike, I'll get in mail Tues crushing, sorry no individual ones right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-22-2014, 04:18 PM	#89
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy I'm looking for nice set of vent windows for my 71...would prefer black..thanks

07-22-2014, 07:26 PM	#90
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy, interested in the stainless steel window visors in post #2, picture #5, total with shipping to 78602. LMK when to SMASH the Paypal button for you again. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

07-22-2014, 09:13 PM	#91
Roscoep Senior Member Join Date: Aug 2007 Location: Jackson, MS Posts: 80	Re: Parting 72 GMC 1/2 ton sierra grande big block I need an ash tray mounting bracket for 71 C10. Somewhere in my build I have misplaced mine. Thanks, Robert __________________ Robert 71 Chevy SWB

07-22-2014, 09:46 PM	#92
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block Brave71, I have a couple sets out there, I'll check condition and get pics Wed after work Jake1971, Paul, I have them sold already, sorry Robert, sorry none right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-23-2014, 07:50 PM	#93
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block Brave71, this is the only set I have, they are stock tint but the rubber seal are weathered Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

07-23-2014, 08:33 PM	#94
Blue GMC Registered User Join Date: Jul 2014 Location: Olathe, KS Posts: 384	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy how much for the headlight bezels and is that the only tailgate you have right now. Dont worry about shipping I can pick up

07-23-2014, 08:42 PM	#95
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block sold the headlight bezels already, and yes this is the only gmc gate I have right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-07-2014, 06:51 PM	#96
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: Parting 72 GMC 1/2 ton sierra grande big block Randy, sorry I didn't get back to you on the black vent windows,family issues,I have decided to go with chrome ones for my 71. Do you have a good set of chrome ones? Thanks

08-07-2014, 10:57 PM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting 72 GMC 1/2 ton sierra grande big block I just hauled in 5 trucks I will see if any are any good on them, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.