Interior door handle and window cranks foam seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jhama78 · 08-10-2014, 04:33 PM

I recently replaced the door handles and window cranks in my 67 and noticed that the foam donuts the seal the back of the handles to the metal door panel were more or less falling apart. Anybody got a source for replacements or have you all just cut new ones out of foam? I've searched on this site and the interwebs and haven't been able to find anything except for the 60-66 felt seals like these: http://www.soffseal.com/store/main.a...tail&item=9019

Thanks in advance for the help gents.

**LockDoc** · 08-10-2014, 07:39 PM

-
I didn't think the '67's had the foam. I know the '72's did with the thicker door panels. How thick are your foam seals?

I'm betting you will have to make them....

LockDoc

**FirstOwner69** · 08-10-2014, 07:52 PM

I don't recall having these on my 69, but would a short piece of 3/4" foam pipe insulation work?

08-10-2014, 04:33 PM	#1
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	Interior door handle and window cranks foam seals I recently replaced the door handles and window cranks in my 67 and noticed that the foam donuts the seal the back of the handles to the metal door panel were more or less falling apart. Anybody got a source for replacements or have you all just cut new ones out of foam? I've searched on this site and the interwebs and haven't been able to find anything except for the 60-66 felt seals like these: http://www.soffseal.com/store/main.a...tail&item=9019 Thanks in advance for the help gents. __________________ -j-rod '06 3500 LWB CC 4wd, 8.1 Allison

08-10-2014, 07:39 PM	#2
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Interior door handle and window cranks foam seals - I didn't think the '67's had the foam. I know the '72's did with the thicker door panels. How thick are your foam seals? I'm betting you will have to make them.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

08-10-2014, 07:52 PM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Interior door handle and window cranks foam seals I don't recall having these on my 69, but would a short piece of 3/4" foam pipe insulation work?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.