fix my rust

[kotapug]

Has anybody bought panels from fixmyrust.com ? There prices and shipping are good and the lady said there stuff is better than goodmark . I know that she is suppose to tell me that so I am looking to see what you guys have thought about there products.

[hanly2]

Got my interest.

[Agent915]

I've bought a couple pieces from them and was very satisfied with the quality and fit of the parts. Couldn't say if their parts are better or worse than anyone else though. I took the time to locate O.E. parts and only had to buy I believe 3-4 aftermarket ones. Hope this helps. Based on the ones I did buy, I would go to them again if I needed something.

Danny

[Oldtruckfanatic]

I need a swb bedside pretty bad. Thinking or giving them a shot.

[franken]

There are very few makers of aftermarket sheetmetal, and many sellers. Virtually all the makers are in Asia. Chances are these folks are selling the same parts as everyone else.

I'd look for a vendor in a nearby state so I don't have to pay excess shipping or sales tax.

[thurmatt]

carandtruckshop.com gives free shipping on orders over $350.00 last time i ordered

[kotapug]

They get there parts from Key Parts so I called them (they will only sell to distributors) they told me the panels come from Taiwan so Im pretty sure its the same plant as Goodmark . I ordered a door and fender and will post my findings when they arrive .

[kotapug]

Originally Posted by thurmatt

carandtruckshop.com gives free shipping on orders over $350.00 last time i ordered

Free shipping does not apply to truck freight

[67swb72klb]

you can try tabco I bought some panels from them the fit was good and ok prices
the floor patches were thick and galvanized too

http://www.google.com/url?sa=t&rct=j...71778758,d.aWw

[kotapug]

Originally Posted by 67swb72klb

you can try tabco I bought some panels from them the fit was good and ok prices
the floor patches were thick and galvanized too

http://www.google.com/url?sa=t&rct=j...71778758,d.aWw

Its nice to see that they are made in the USA !

[hanly2]

Originally Posted by Agent915

I've bought a couple pieces from them and was very satisfied with the quality and fit of the parts. Couldn't say if their parts are better or worse than anyone else though. I took the time to locate O.E. parts and only had to buy I believe 3-4 aftermarket ones. Hope this helps. Based on the ones I did buy, I would go to them again if I needed something.

Danny

So you can compare because you bought oem ones also. Sounds like you thought they were pretty good.

[67swb72klb]

Originally Posted by kotapug

Its nice to see that they are made in the USA !

some parts are but not all of them they are good people to work with
good luck with the rust it is not much fun!!

[Agent915]

Originally Posted by hanly2

So you can compare because you bought oem ones also. Sounds like you thought they were pretty good.

Its not uncommon to have to "hog-out" bolt holes to get aftermarket parts to fit/line up properly. The parts I bought from "Fix My Rust" fit without any massaging at all.

Danny

[hugger6933]

Last time I made a order I had it down to them and Top Banana. Top banana were the ones I got a hold of on the phone or something I don't remember now but I'm glad I had to make a choice between the two.If TB has any part my shop needs I'll only order from them those part I got from them [were key parts]and great price. But with that being said I am a little closer to TB than FMR and the day or two getting it faster maight have something to do with that cause the prices from both are almost impossible to beat. Jim

[kotapug]

Called FMR yesterday to check on my body panels that I ordered and they said one part was back ordered and they would not ship the others until all arrived . They said I should see the parts around Sept. 1st so I cancelled my order with them. Any suggestions on where to buy from now that will not kill a guy on shipping ?

[Tree-50]

I bought some rockers from classic heartbeat, vendor on here. Should arrive Monday and I'll let you know how it goes!

[Elliot949]

Originally Posted by Oldtruckfanatic

I need a swb bedside pretty bad. Thinking or giving them a shot.

Don't get any "Counterparts" manufacturing parts... they are absolute garbage...

[kotapug]

I think Im going to try Top Banana

[72bowtiestepper]

Ordered several times from Fix My Rust....shipping prices were better than other vendors for the exact same parts....all aftermarket Key parts & Tri-Plus

[PanelDeland]

Try Bowtie Truck shop Kevin & Lisa are in MN. and can hook you up.You'll probably save some on shipping since they are fairly close.Be prepared for Ochre' overload.They are a site vendor.