How much for a decent exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noahsmall · 08-13-2014, 10:41 PM

I have headers, I was just wondering about how much it would be for the mufflers and pipes.

71 super · 08-13-2014, 10:52 PM

Just got complete exhaust on 67 done with two super 44s from manifolds back for $350. He supplied pipe mufflers flanges and hangers.

noahsmall · 08-13-2014, 11:00 PM

Thanks a lot. I'm trying to have a good estimate. Also I'm not sure what to go with, I've got a 400sb.

BLT gmc · 08-13-2014, 11:13 PM

Just had exhaust on 69 GMC K10 custom made. I had cone type headers the center dump shortie style already on the truck. True dual exhaust, crossover, tucked up in the truck frame, generic mufflers, over the axle turned out behind the tires at a 45 was ~$475 OTD. This is in Western Nebraska. He supplied all the materials. Good luck, Bruce

**truckdude239** · 08-13-2014, 11:16 PM

71 where in nc was that i have hax qoutez from 575-900 to do my 71 c10

**truckdude239** · 08-13-2014, 11:17 PM

Btw naoh i work in winston salem aNd live in Lewisville

**CUSTOM/10** · 08-14-2014, 07:14 AM

I just got 3 quotes for 2-1/2" SS dual exhaust from header flanges back, turned out behind the rear wheels, with a crossover pipe.

2- Quotes were between $600-$700 depending on what mufflers I went with. ( These were both small but well know exhaust shops )

The other was from Lou's Custom Exhaust ( A franchise chain ) They wanted the same money for aluminized exhaust, and double for SS...

Gary

bigguy69 · 08-14-2014, 09:06 AM

Quote:

Originally Posted by 71 super

just got complete exhaust on 67 done with two super 44s from manifolds back for $350. He supplied pipe mufflers flanges and hangers.

i am curious about this as well. I need to get some done as well

71 super · 08-14-2014, 03:01 PM

I am in canton, about 15 minutes west of Asheville. Shop is located within Pisgah tire

**truckdude239** · 08-14-2014, 03:05 PM

Eww that a bit of a drive as i have no exhaust on it now lol

YourBuddy'sTruck · 08-14-2014, 05:27 PM

Ohio on Lake Erie...$495 for dual, no headers, big mufflers that keep me real quiet.

hdff · 08-14-2014, 06:02 PM

i just paid $250 for 3" from the headers back out behind the rear tires. no cross piece and i supplied the dynamax mufflers ( got em on amazon alot cheaper than he could get them for). also included stainless 3" tips. went back and added a cross pipe for $50. this was from a small well known custom shop not far from the house.

bigguy69 · 08-14-2014, 10:27 PM

Quote:

Originally Posted by 71 super

I am in canton, about 15 minutes west of Asheville. Shop is located within Pisgah tire

If you could pm me or something I would like to have an address for the shop if you don't mind. Thanks.

67ctener · 08-14-2014, 11:53 PM

I feel I got took on mine now. I have a bagged truck so very tight clearances... Duals 50's, h pipe, and dual walled stainless tips for 750

NC_John · 08-15-2014, 06:51 AM

I'm getting mine done today at Muffler Masters in Kannapolis. Headers back to past the mid section crossmember. With flowmaster 40's I've been told to expect around $500. Feels high but they do great work.

I'd rather pay a little more and be happy with it than try to save some money and be pissed off everytime I look under the truck (and I spend a lot of time under there)

ADDED: Got it done....

**kwmech** · 08-15-2014, 11:29 AM

520.00 for a single 3'' exhaust form the manifolds back on my big block

oneoff · 08-16-2014, 11:55 PM

I've done two trucks lately and both where around $500.00 and the shop supplied everything except tips. One was a big block the other was a 6.2L

dirtyjim · 08-17-2014, 05:59 AM

my brother in law does exhaust out of his auto repair shop in spring texas so when I finally decide to do mine I just have to pay for materials, wait for a slow week and drive across town with my ears ringing from the damn flowmasters.

BlackedOut67shorty · 08-17-2014, 03:23 PM

Quote:

Originally Posted by dirtyjim

my brother in law does exhaust out of his auto repair shop in spring texas so when I finally decide to do mine I just have to pay for materials, wait for a slow week and drive across town with my ears ringing from the damn flowmasters.

Better than glasspacks going out the sides

Andy4639 · 08-17-2014, 04:59 PM

Pickens SC with 2 Magnaflows. He supplied everything with Aluminum pipe 2.5" diameter. $350.00 for everything. From header flange back.

Keowee Muffler & Brake
112 Cha Ru Dr, Pickens, SC 29671
(864) 878-7779

08-13-2014, 10:41 PM	#1
noahsmall Registered User Join Date: Mar 2014 Location: winston-salem NC Posts: 7	How much for a decent exhaust I have headers, I was just wondering about how much it would be for the mufflers and pipes.

08-13-2014, 10:52 PM	#2
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: How much for a decent exhaust Just got complete exhaust on 67 done with two super 44s from manifolds back for $350. He supplied pipe mufflers flanges and hangers. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-13-2014, 11:00 PM	#3
noahsmall Registered User Join Date: Mar 2014 Location: winston-salem NC Posts: 7	Re: How much for a decent exhaust Thanks a lot. I'm trying to have a good estimate. Also I'm not sure what to go with, I've got a 400sb.

08-13-2014, 11:13 PM	#4
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: How much for a decent exhaust Just had exhaust on 69 GMC K10 custom made. I had cone type headers the center dump shortie style already on the truck. True dual exhaust, crossover, tucked up in the truck frame, generic mufflers, over the axle turned out behind the tires at a 45 was ~$475 OTD. This is in Western Nebraska. He supplied all the materials. Good luck, Bruce

08-13-2014, 11:16 PM	#5
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,232	Re: How much for a decent exhaust 71 where in nc was that i have hax qoutez from 575-900 to do my 71 c10 __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-13-2014, 11:17 PM	#6
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,232	Re: How much for a decent exhaust Btw naoh i work in winston salem aNd live in Lewisville __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-14-2014, 07:14 AM	#7
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,806	Re: How much for a decent exhaust I just got 3 quotes for 2-1/2" SS dual exhaust from header flanges back, turned out behind the rear wheels, with a crossover pipe. 2- Quotes were between $600-$700 depending on what mufflers I went with. ( These were both small but well know exhaust shops ) The other was from Lou's Custom Exhaust ( A franchise chain ) They wanted the same money for aluminized exhaust, and double for SS... Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 08-14-2014 at 08:51 AM.

08-14-2014, 03:01 PM	#9
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: How much for a decent exhaust I am in canton, about 15 minutes west of Asheville. Shop is located within Pisgah tire __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-14-2014, 03:05 PM	#10
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,232	Re: How much for a decent exhaust Eww that a bit of a drive as i have no exhaust on it now lol __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

08-14-2014, 05:27 PM	#11
YourBuddy'sTruck Registered User Join Date: May 2013 Location: Catawba Island, OH Posts: 203	Re: How much for a decent exhaust Ohio on Lake Erie...$495 for dual, no headers, big mufflers that keep me real quiet.

08-14-2014, 06:02 PM	#12
hdff Registered User Join Date: Apr 2007 Location: pasadena,TEXAS Posts: 880	Re: How much for a decent exhaust i just paid $250 for 3" from the headers back out behind the rear tires. no cross piece and i supplied the dynamax mufflers ( got em on amazon alot cheaper than he could get them for). also included stainless 3" tips. went back and added a cross pipe for $50. this was from a small well known custom shop not far from the house.

08-14-2014, 11:53 PM	#14
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: How much for a decent exhaust I feel I got took on mine now. I have a bagged truck so very tight clearances... Duals 50's, h pipe, and dual walled stainless tips for 750 __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

08-15-2014, 06:51 AM	#15
NC_John Registered User Join Date: Jul 2013 Location: Rockwell, NC Posts: 1,639	Re: How much for a decent exhaust I'm getting mine done today at Muffler Masters in Kannapolis. Headers back to past the mid section crossmember. With flowmaster 40's I've been told to expect around $500. Feels high but they do great work. I'd rather pay a little more and be happy with it than try to save some money and be pissed off everytime I look under the truck (and I spend a lot of time under there) ADDED: Got it done.... __________________ 1970 C-10 LWB "Blu" Instagram (current build pictures) 70_nc_c10 Last edited by NC_John; 08-15-2014 at 11:29 AM.

08-15-2014, 11:29 AM	#16
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,492	Re: How much for a decent exhaust 520.00 for a single 3'' exhaust form the manifolds back on my big block

08-16-2014, 11:55 PM	#17
oneoff Registered User Join Date: Jun 2011 Location: Parker Colorado Posts: 174	Re: How much for a decent exhaust I've done two trucks lately and both where around $500.00 and the shop supplied everything except tips. One was a big block the other was a 6.2L __________________ Build: http://67-72chevytrucks.com/vboard/s...d.php?t=541803 Dennis H 1969 Chevy C10, SWB, LS3,6.2L engine 1969 Chevy Chevelle SS,BBC, Convertible



Register or Log In To remove these advertisements.

08-17-2014, 05:59 AM	#18
dirtyjim Registered User Join Date: Feb 2013 Location: alvin, texas Posts: 622	Re: How much for a decent exhaust my brother in law does exhaust out of his auto repair shop in spring texas so when I finally decide to do mine I just have to pay for materials, wait for a slow week and drive across town with my ears ringing from the damn flowmasters. __________________ 1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus

08-17-2014, 04:59 PM	#20
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: How much for a decent exhaust Pickens SC with 2 Magnaflows. He supplied everything with Aluminum pipe 2.5" diameter. $350.00 for everything. From header flange back. Keowee Muffler & Brake 112 Cha Ru Dr, Pickens, SC 29671 (864) 878-7779 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

Register or Log In To remove these advertisements.