Does anyone offer the brake booster vacuum pipe? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davepl · 08-18-2014, 10:34 PM

I ordered what was supposed to be the one for the 70 big block, but it came with a male end on it.

It should have the female end on it like this picture (this is a Corvette unit). The vacuum fitting on the manifold has male threads.

Does anyone know where I could find one?

Thanks,
Dave

*JonnyC10* · 08-18-2014, 10:40 PM

Like this? This the one I ordered from CPP. Hope to install it on my 283 tomorrow. Hopefully there is a place to put it. Havent looked yet.

http://www.ebay.com/itm/380463976070...%3AMEBIDX%3AIT

davepl · 08-18-2014, 11:20 PM

Nope. I have the factory fitting in the intake manifold. I need the metal pipe. But I need the pipe with female threads that goes OVER the male threads of the intake fitting.

67ctener · 08-19-2014, 12:50 AM

I may have an oe one that could be cleaned and coated? If you want I can look for it

67ctener · 08-19-2014, 12:53 AM

This came off a 71 402

71 super · 08-19-2014, 06:53 AM

Check with companies who offer this for Camaro and impala restoration. A lot do these parts are common, interior pieces to Camaro and engine bay to the big cars. The correct pipe with bracket is available from ricks Camaro parts, as are the correct vac lines with white stripe and other detail pieces.

davepl · 08-19-2014, 03:13 PM

I went through Ricks searching for "vacuum" and "booster" and did not find one. They do sell a generic cut-to-fit rubber one.

67ctener's is perfect, since I have a 70 402. They're specific to the TH400 and I think they only used glides in the Vette, though by 1970 I have no idea.

71 super · 08-19-2014, 08:39 PM

I know I got one from them before ecklers bought them out. I will look and see what I can find.

71 super · 08-19-2014, 08:44 PM

Go to brakes in ricks camaros, scroll to bottom of page one, click see more, part is pdb21 for bb Camaro. Hope it helps

Livrat · 08-19-2014, 09:25 PM

Here is the link to the one at Rick's Camaros.
http://www.rickscamaros.com/camaro-p...1967-1969.html

It looks real close to the one on my 1970 C30.

The one that Scott (67ctener) has off a 71 looks to have a wider mounting flange.

**WIDESIDE72** · 08-20-2014, 09:11 PM

Post a wtb ad on the parts forum

**leddzepp** · 08-20-2014, 09:52 PM

Quote:

Originally Posted by WIDESIDE72

Post a wtb ad on the parts forum

X2. I'll bet Randy has one (teeitup)

08-18-2014, 10:34 PM	#1
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Does anyone offer the brake booster vacuum pipe? I ordered what was supposed to be the one for the 70 big block, but it came with a male end on it. It should have the female end on it like this picture (this is a Corvette unit). The vacuum fitting on the manifold has male threads. Does anyone know where I could find one? Thanks, Dave Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

08-18-2014, 10:40 PM	#2
JonnyC10 Account Suspended Join Date: Jul 2014 Location: NH Posts: 280	Re: Does anyone offer the brake booster vacuum pipe? Like this? This the one I ordered from CPP. Hope to install it on my 283 tomorrow. Hopefully there is a place to put it. Havent looked yet. http://www.ebay.com/itm/380463976070...%3AMEBIDX%3AIT

08-18-2014, 11:20 PM	#3
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Does anyone offer the brake booster vacuum pipe? Nope. I have the factory fitting in the intake manifold. I need the metal pipe. But I need the pipe with female threads that goes OVER the male threads of the intake fitting. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

08-19-2014, 12:50 AM	#4
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Does anyone offer the brake booster vacuum pipe? I may have an oe one that could be cleaned and coated? If you want I can look for it __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

08-19-2014, 12:53 AM	#5
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Does anyone offer the brake booster vacuum pipe? This came off a 71 402 Attached Images __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

08-19-2014, 06:53 AM	#6
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Does anyone offer the brake booster vacuum pipe? Check with companies who offer this for Camaro and impala restoration. A lot do these parts are common, interior pieces to Camaro and engine bay to the big cars. The correct pipe with bracket is available from ricks Camaro parts, as are the correct vac lines with white stripe and other detail pieces. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-19-2014, 03:13 PM	#7
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Does anyone offer the brake booster vacuum pipe? I went through Ricks searching for "vacuum" and "booster" and did not find one. They do sell a generic cut-to-fit rubber one. 67ctener's is perfect, since I have a 70 402. They're specific to the TH400 and I think they only used glides in the Vette, though by 1970 I have no idea. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

08-19-2014, 08:39 PM	#8
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Does anyone offer the brake booster vacuum pipe? I know I got one from them before ecklers bought them out. I will look and see what I can find. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-19-2014, 08:44 PM	#9
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Does anyone offer the brake booster vacuum pipe? Go to brakes in ricks camaros, scroll to bottom of page one, click see more, part is pdb21 for bb Camaro. Hope it helps __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

08-19-2014, 09:25 PM	#10
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: Does anyone offer the brake booster vacuum pipe? Here is the link to the one at Rick's Camaros. http://www.rickscamaros.com/camaro-p...1967-1969.html It looks real close to the one on my 1970 C30. The one that Scott (67ctener) has off a 71 looks to have a wider mounting flange. Attached Images

08-20-2014, 09:11 PM	#11
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Does anyone offer the brake booster vacuum pipe? Post a wtb ad on the parts forum



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.