Front Clip Alignment - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andrew68c10 · 01-15-2004, 02:31 PM

I put my front clip back on last night and everything lines up except where the inner fenders bolt up to the cab. Are there supposed to be gaps there? Is that where those U-shaped spacers go? I can't remember from a year ago when I took it apart.

JimKshortstep4x4 · 01-15-2004, 03:10 PM

If you are talking about the 7/16" bolts with the large washers on them, you will not need shims as you can pull the liner up to the cab.

Jim

01-15-2004, 02:31 PM	#1
Andrew68c10 Registered User Join Date: Sep 2000 Location: Paso Robles, CA Posts: 178	Front Clip Alignment I put my front clip back on last night and everything lines up except where the inner fenders bolt up to the cab. Are there supposed to be gaps there? Is that where those U-shaped spacers go? I can't remember from a year ago when I took it apart. __________________ 1968 Chevy C10 Longbed Fleetside

01-15-2004, 03:10 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If you are talking about the 7/16" bolts with the large washers on them, you will not need shims as you can pull the liner up to the cab. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.