I need a bigger truck for my new USA-1 plate! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 08-22-2014, 09:19 PM

I know the earlier ones are steel and this is aluminum, but what do you think? I have never seen one quite like this.

sboris · 08-22-2014, 09:42 PM

Cool plate! How bout this one?

71swb4x4 · 08-22-2014, 09:50 PM

How long is it? It looks dang near 3' long!

**too much stuff** · 08-22-2014, 10:23 PM

Quote:

Originally Posted by 71swb4x4

How long is it? It looks dang near 3' long!

OK, you picked up on it! Was the tire track the give away?
Here are comparison pics. I have never seen one of these before. Came from on old dealership along with some other goodies i may start a thread on...

71swb4x4 · 08-22-2014, 10:35 PM

Quote:

Originally Posted by too much stuff

OK, you picked up on it! Was the tire track the give away?

If you swept your driveway once in a while it wouldn't have been so easy to pick up on.

Andy4639 · 08-23-2014, 06:00 AM

There no mounting holes!

**special-K** · 08-23-2014, 06:56 AM

If you find a rust free cab with a sunroof cut in it...There ya go! Classy roof patchy. I'm sure that piece is worth too much for that. Great find

tommys72 · 08-23-2014, 08:14 AM

Thats cool...look real good on the garage wall

**too much stuff** · 08-23-2014, 08:48 AM

Quote:

Originally Posted by Andy4639

There no mounting holes!

There are some small holes that look to line up with the bumper bolts...

Quote:

Originally Posted by special-K

If you find a rust free cab with a sunroof cut in it...There ya go! Classy roof patchy. I'm sure that piece is worth too much for that. Great find

Leave it to tim to come up with that! At least you didn't say to bend it and make a floor patch on a rusty truck! It is an expensive patch panel, i gave $100 for it. Not sure if it was a good deal or not. Don't care, i like it...

Quote:

Originally Posted by tommys72

Thats cool...look real good on the garage wall

That is where it is heading.

**special-K** · 08-23-2014, 09:21 AM

I think as signage goes with the age and condition you did fantastic.

Andy4639 · 08-23-2014, 10:56 AM

Quote:

Originally Posted by too much stuff

There are some small holes that look to line up with the bumper bolts...

Leave it to tim to come up with that! At least you didn't say to bend it and make a floor patch on a rusty truck! It is an expensive patch panel, i gave $100 for it. Not sure if it was a good deal or not. Don't care, i like it...

That is where it is heading.

Those are not to mount it to a vehicle was what I was referring to.

**lolife99** · 08-23-2014, 11:44 AM

Very cool sign!

**Already Gone** · 08-23-2014, 03:20 PM

Eric if you put that sign on Ebay for sale it'd probably blow your mind what it would sell for.

**too much stuff** · 08-23-2014, 04:59 PM

Quote:

Originally Posted by special-K

I think as signage goes with the age and condition you did fantastic.

Thanks tim.

Quote:

Originally Posted by Andy4639

Those are not to mount it to a vehicle was what I was referring to.

Gotcha...

Quote:

Originally Posted by lolife99

Very cool sign!

Thanks.

Quote:

Originally Posted by Already Gone

Eric if you put that sign on Ebay for sale it'd probably blow your mind what it would sell for.

I think you are right, but i like it too much...

08-22-2014, 09:19 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,712	I need a bigger truck for my new USA-1 plate! I know the earlier ones are steel and this is aluminum, but what do you think? I have never seen one quite like this. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-22-2014, 09:42 PM	#2
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: I need a bigger truck for my new USA-1 plate! Cool plate! How bout this one? __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

08-22-2014, 09:50 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: I need a bigger truck for my new USA-1 plate! How long is it? It looks dang near 3' long! __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-23-2014, 06:00 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: I need a bigger truck for my new USA-1 plate! There no mounting holes! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-23-2014, 06:56 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: I need a bigger truck for my new USA-1 plate! If you find a rust free cab with a sunroof cut in it...There ya go! Classy roof patchy. I'm sure that piece is worth too much for that. Great find __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-23-2014, 08:14 AM	#8
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: I need a bigger truck for my new USA-1 plate! Thats cool...look real good on the garage wall __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

08-23-2014, 09:21 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: I need a bigger truck for my new USA-1 plate! I think as signage goes with the age and condition you did fantastic. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-23-2014, 11:44 AM	#12
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,691	Re: I need a bigger truck for my new USA-1 plate! Very cool sign! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-23-2014, 03:20 PM	#13
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,105	Re: I need a bigger truck for my new USA-1 plate! Eric if you put that sign on Ebay for sale it'd probably blow your mind what it would sell for. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.