Matt's 56 3600 4X4 Build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OldChevysRule · 08-29-2014, 10:43 AM

Matt............I have some other brackets that support the transfer case from the bottom. They attach to the lower transmission bolt holes and use a little longer bolt. I pulled them from a 91 Suburban 4 wheel drive that I scrapped several years ago. I am planning to convert my truck to 4X4, so I will probably use the ones I have, but I thought I would pass the info along so you will know where to look when you go to your local salvage yard. You might also find them on the K-5 Blazers as well. I have never seen them on any pickups, but they may have just been removed. Jason

08-29-2014, 10:43 AM	#10
OldChevysRule Registered User Join Date: Mar 2014 Location: Theodore, AL Posts: 61	Re: Matt's 56 3600 4X4 Build Matt............I have some other brackets that support the transfer case from the bottom. They attach to the lower transmission bolt holes and use a little longer bolt. I pulled them from a 91 Suburban 4 wheel drive that I scrapped several years ago. I am planning to convert my truck to 4X4, so I will probably use the ones I have, but I thought I would pass the info along so you will know where to look when you go to your local salvage yard. You might also find them on the K-5 Blazers as well. I have never seen them on any pickups, but they may have just been removed. Jason __________________ Jason Trucks don't mind if you have another truck just for "running around town". My build thread: Double Jeopardy Last edited by OldChevysRule; 08-29-2014 at 10:45 AM. Reason: Addressed the wrong person.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.