I got the blower motor going, but... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jimal · 08-30-2014, 01:40 PM

Okay, so after replacing the blower motor, the resistor and the fan switch/control cable on my Thrift Air setup, I now get three fan speeds and all the flaps are moving as they should. So why isn't there any air coming out of anywhere?

http://youtu.be/hfqt7lb0dXY

I'm thinking that maybe there is a mouse nest in there somewhere. I'm not finding any obvious blockages in the hoses going to the defroster ducts. While I'm sure this is an effective system for the time, though not quite up to modern standards, I'm sure there should be more air moving than this.

**Jurassic-1** · 08-30-2014, 07:55 PM

Are you sure the flap is opening? Have you gone under the dash and checked it or watched the cable operate the door? Is it possible to put the fan cage on backwards ? My 1966 works very well and blows pretty good.

**Chevy Fleetside** · 08-30-2014, 08:10 PM

I remember that the blower would not work on my truck when I got it. I thought about swapping out the blower motor but decided to just swap the whole thing since I had another one. When I took the heater unit off it was packed full of leaves from over 48 years. I am happy it didn't turn on..

Also are you pulling the knob out?

Jimal · 08-30-2014, 10:02 PM

I put the fan on upside down...

With that detail taken care of, success!

http://youtu.be/g2_EyfSrD0g

Woogeroo · 08-30-2014, 10:12 PM

fancy!

way to go.

-W

**Jurassic-1** · 08-31-2014, 10:29 AM

Glad it was that simple.

markeb01 · 08-31-2014, 02:15 PM

Some of the fans turn the opposite direction as well. When I was shopping for a non-stock replacement, I found that only Pontiac Fiero and Chevy S10 fans turned the direction I needed. I went with the Fiero as they are mounted in the trunk and always look like new. Just something to consider for others that may have problems.

Jimal · 08-31-2014, 03:50 PM

Quote:

Originally Posted by markeb01

Some of the fans turn the opposite direction as well. When I was shopping for a non-stock replacement, I found that only Pontiac Fiero and Chevy S10 fans turned the direction I needed. I went with the Fiero as they are mounted in the trunk and always look like new. Just something to consider for others that may have problems.

I got this from LMC and one I put the fan on right it worked fine.

seabeevin · 08-31-2014, 09:58 PM

I got one from a 77 nova. worked great.

08-30-2014, 01:40 PM	#1
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	I got the blower motor going, but... Okay, so after replacing the blower motor, the resistor and the fan switch/control cable on my Thrift Air setup, I now get three fan speeds and all the flaps are moving as they should. So why isn't there any air coming out of anywhere? http://youtu.be/hfqt7lb0dXY I'm thinking that maybe there is a mouse nest in there somewhere. I'm not finding any obvious blockages in the hoses going to the defroster ducts. While I'm sure this is an effective system for the time, though not quite up to modern standards, I'm sure there should be more air moving than this.

08-30-2014, 07:55 PM	#2
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: I got the blower motor going, but... Are you sure the flap is opening? Have you gone under the dash and checked it or watched the cable operate the door? Is it possible to put the fan cage on backwards ? My 1966 works very well and blows pretty good.

08-30-2014, 08:10 PM	#3
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,780	Re: I got the blower motor going, but... I remember that the blower would not work on my truck when I got it. I thought about swapping out the blower motor but decided to just swap the whole thing since I had another one. When I took the heater unit off it was packed full of leaves from over 48 years. I am happy it didn't turn on.. Also are you pulling the knob out? __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536

08-30-2014, 10:02 PM	#4
Jimal Registered User Join Date: Jun 2014 Location: Connecticut Posts: 521	Re: I got the blower motor going, but... I put the fan on upside down... With that detail taken care of, success! http://youtu.be/g2_EyfSrD0g

08-30-2014, 10:12 PM	#5
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: I got the blower motor going, but... fancy! way to go. -W

08-31-2014, 10:29 AM	#6
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: I got the blower motor going, but... Glad it was that simple.

08-31-2014, 02:15 PM	#7
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: I got the blower motor going, but... Some of the fans turn the opposite direction as well. When I was shopping for a non-stock replacement, I found that only Pontiac Fiero and Chevy S10 fans turned the direction I needed. I went with the Fiero as they are mounted in the trunk and always look like new. Just something to consider for others that may have problems. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

08-31-2014, 09:58 PM	#9
seabeevin Registered User Join Date: Feb 2013 Location: gulfport, ms Posts: 14	Re: I got the blower motor going, but... I got one from a 77 nova. worked great. __________________ 65 stepside C20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.