throttle pedal and cable for 65 c10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kha4079 · 08-31-2014, 08:38 PM

anyone know which one to get i eliminated the old linkage crap and now i need the pedal with cable and hardware for my 5.3 swap. anyone know where to get one? i been looking throughout this whole forum and all i see is for 68 and up... thanks in advance

**66 C10 383** · 09-01-2014, 12:46 AM

Starting at port 110 Mark shows how he adapted a cable throttle pedal from a 71 - 72 C10.

http://67-72chevytrucks.com/vboard/s...le#post5286113

Post 41 shows a Lokar pedal ...

http://67-72chevytrucks.com/vboard/s...le#post6284534

Post 668 shows another one.

http://67-72chevytrucks.com/vboard/s...le#post6611436

Dismas · 09-01-2014, 04:36 AM

I went to pick n pull and yanked the pedal assembly and cable from a late 70-early 80's ish chevy.

I used the post referenced above to aid on the changeover, though on my 66 things lined up a smidge different.

If you go the junkyard route, make sure to also nab the bracket that holds the carb side of the cable, the one I have bolted to the intake manifild, looks like it also has a spot for a kickdown levercable/whatever to mount, but mine is a manual tranny.

I did the gas pedal changeover plus reinstalled my MIP floor mat correctly ( PO had done a horriblr job, totally misaligned) and installed retracting seat belts for deiver and passenger, then mounted 2 old belts in middle so kids could have belts, and it took a total of about 7 hours for all 3 projects.

08-31-2014, 08:38 PM	#1
kha4079 Registered User Join Date: Jun 2014 Location: houston tx Posts: 10	throttle pedal and cable for 65 c10? anyone know which one to get i eliminated the old linkage crap and now i need the pedal with cable and hardware for my 5.3 swap. anyone know where to get one? i been looking throughout this whole forum and all i see is for 68 and up... thanks in advance

09-01-2014, 12:46 AM	#2
66 C10 383 Senior Member Join Date: Aug 2012 Location: Somewhere In So. IL. Posts: 412	Re: throttle pedal and cable for 65 c10? Starting at port 110 Mark shows how he adapted a cable throttle pedal from a 71 - 72 C10. http://67-72chevytrucks.com/vboard/s...le#post5286113 Post 41 shows a Lokar pedal ... http://67-72chevytrucks.com/vboard/s...le#post6284534 Post 668 shows another one. http://67-72chevytrucks.com/vboard/s...le#post6611436 __________________ Doug Old Build Thread - 383/T56 http://www.67-72chevytrucks.com/vboa...d.php?t=540838 Updated Build Thread - Modern Relic - 66 C10 536 Dark Aqua 5.3/4L60E - BTR Stage IV Truck Cam - Vintage Air - Dakota Digital http://67-72chevytrucks.com/vboard/s...d.php?t=778784

09-01-2014, 04:36 AM	#3
Dismas Registered User Join Date: Dec 2013 Location: Reno, NV Posts: 34	Re: throttle pedal and cable for 65 c10? I went to pick n pull and yanked the pedal assembly and cable from a late 70-early 80's ish chevy. I used the post referenced above to aid on the changeover, though on my 66 things lined up a smidge different. If you go the junkyard route, make sure to also nab the bracket that holds the carb side of the cable, the one I have bolted to the intake manifild, looks like it also has a spot for a kickdown levercable/whatever to mount, but mine is a manual tranny. I did the gas pedal changeover plus reinstalled my MIP floor mat correctly ( PO had done a horriblr job, totally misaligned) and installed retracting seat belts for deiver and passenger, then mounted 2 old belts in middle so kids could have belts, and it took a total of about 7 hours for all 3 projects.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.