Part # help.. Hub retaining ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72CampSpecial · 08-31-2014, 01:03 PM

Ive got part #3663672 for this part...but I've been unable to cross reference it to any parts stores? Has anyone ordered one of these from a big box chain or online location..if so..what part # did you use to order?

**kwmech** · 08-31-2014, 01:10 PM

Is that for the rear of a 14 bolt? What's wrong with it?

72CampSpecial · 08-31-2014, 01:13 PM

Quote:

Originally Posted by kwmech

Is that for the rear of a 14 bolt? What's wrong with it?

its from a HO52 rear end, floating hub. Ive had some issues with the outer bearing and this was pushed out of the track it sits in when the last bearing ate itself.. id like to replace it to make sure it good to go..

Here is my saga...
http://67-72chevytrucks.com/vboard/s...=1#post6823299

**kwmech** · 08-31-2014, 01:16 PM

Got it. Same set up as the 14b.

Sure the number is correct, not coming up an anything I have here

72CampSpecial · 08-31-2014, 01:27 PM

thats the issue.. either am I.. it was a number passed on to me.. but i can't seem to find it..

Hoping someone else has purchased one..maybe a Dorman part number or something...

**kwmech** · 08-31-2014, 01:41 PM

My Dorman book is every bit of 2'' thick and does not have a listing for that

72CampSpecial · 08-31-2014, 01:49 PM

I've seen it called a "Hub Retaining Ring" and this web page

http://www.gmpartswiki.com/getpage?pageid=26789

has it as a "ring spacer retainer" with the same part # i have listed above..

72CampSpecial · 09-01-2014, 06:56 PM

Bump..

airdale94 · 09-02-2014, 05:32 PM

The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search.

72CampSpecial · 09-02-2014, 07:09 PM

Quote:

Originally Posted by airdale94

The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search.

thanks for the clarification..

08-31-2014, 01:03 PM	#1
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Part # help.. Hub retaining ring Ive got part #3663672 for this part...but I've been unable to cross reference it to any parts stores? Has anyone ordered one of these from a big box chain or online location..if so..what part # did you use to order?

08-31-2014, 01:10 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: Part # help.. Hub retaining ring Is that for the rear of a 14 bolt? What's wrong with it?

08-31-2014, 01:16 PM	#4
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: Part # help.. Hub retaining ring Got it. Same set up as the 14b. Sure the number is correct, not coming up an anything I have here

08-31-2014, 01:27 PM	#5
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: Part # help.. Hub retaining ring thats the issue.. either am I.. it was a number passed on to me.. but i can't seem to find it.. Hoping someone else has purchased one..maybe a Dorman part number or something...

08-31-2014, 01:41 PM	#6
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: Part # help.. Hub retaining ring My Dorman book is every bit of 2'' thick and does not have a listing for that

08-31-2014, 01:49 PM	#7
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: Part # help.. Hub retaining ring I've seen it called a "Hub Retaining Ring" and this web page http://www.gmpartswiki.com/getpage?pageid=26789 has it as a "ring spacer retainer" with the same part # i have listed above..

09-01-2014, 06:56 PM	#8
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: Part # help.. Hub retaining ring Bump..

09-02-2014, 05:32 PM	#9
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: Part # help.. Hub retaining ring The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search. __________________ 68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.