|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-16-2004, 02:00 PM
|
#1 |
|
///Relaxed Atmosphere
Join Date: Apr 2003
Location: Hockley, TX
Posts: 657
|
72 sub w/ 700R4 speedo cable p/n?
I just put a new 350 crate motor and 700R4 in y 72 sub. I have seen some threads regarding what to do about the speedometer cable having to be replaced with a longer one, like I need to do. Does any one know a speedometer cable p/n to use or what year model vehicle to ask for the speedometer cable out of? This seem to be the easiest way to get parts at an auto parts store now days.
Jeff |
|
|
|
01-16-2004, 02:53 PM
|
#2 |
|
Car Knocker
Join Date: May 2001
Location: jefferson,arkansas
Posts: 664
|
On my truck, originally a 250 w/3 on the tree. When I replace it with a 350 and a 700r mounted in the v-8 position. I did not have to replace the speed o meter cable. Just lucky I guess. As far as I know it is the factory original. 36 years old.
__________________
68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit. |
|
|
|
|
01-18-2004, 01:26 PM
|
#3 |
|
14.1 @ 96MPH
Join Date: Jul 2001
Location: Mesa, AZ
Posts: 2,811
|
I had to trial-and-error mine
 The one I had on my 350/TH400 combo was a few inches short. Went to NAPA, asked for that cable, but a few inches longer - since they list their lengths and everything, it's no problem.
__________________
Project1970 - LS1 Swap Complete! 
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
