more starter woes... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HvyChevy454 · 04-02-2002, 02:29 AM

so i fixed my startere problem of not mesh the gears right and grinding up the flex plate, by shimming one side of the starter. till yesterday it worked fine, for some reason the aluminum casing decided to split rigth down the middle making the starter useless. This starter will be replaced w/ starter #4 in 5 months.

------------------
Lutz, Fl
My Team Website
The Heavy Chevy Website
------------------

72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi
91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust
71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works...
Put it to the floor...

WHYBYNU · 04-02-2002, 12:17 PM

I just went through the same thing 3 starters in 3mo. There are 2 diff. starters that come on the computer at the parts store

WHYBYNU · 04-02-2002, 12:25 PM

Messed up that reply so I'll try it again.
I kept getting the wrong starter I finally got the right one, you could tell it was right from the first time I started the truck it sounded tighter no griding, no shims. make sure the starter is the right one
there were 2 diff. ones come up on the computer at the parts store (Advance Auto) for my truck 71 350/350.

04-02-2002, 02:29 AM	#1
HvyChevy454 Slowly getting CRSS... Join Date: Jul 2001 Location: Lutz, Florida Posts: 656	more starter woes... so i fixed my startere problem of not mesh the gears right and grinding up the flex plate, by shimming one side of the starter. till yesterday it worked fine, for some reason the aluminum casing decided to split rigth down the middle making the starter useless. This starter will be replaced w/ starter #4 in 5 months. ------------------ Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Intake 850 cfm carb Comp Cam 268/.500 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Put it to the floor... __________________ -Nic Lutz, Fl My Team Website The Heavy Chevy Website ------------------ 72 Cheyenne 10 LWB GM 12-bolt 3.08 w/ Auburn Posi 91 454 Edel Performer RPM Intake 750 cfm carb Comp Cam 268/.495 Hedman Headers Dual 3'' Exhaust 71 Cheyenne 20 4x4 Fact. A/C PS PB Tilt Currently in the works... Speak Softly and Carry A Big Block... There is No replacement for Displacement... "If everything seems under control, you're just not going fast enough." - Mario Andretti

04-02-2002, 12:17 PM	#2
WHYBYNU WHYBYNU when old will do Join Date: Feb 2002 Location: Hot Springs, AR. Posts: 643	I just went through the same thing 3 starters in 3mo. There are 2 diff. starters that come on the computer at the parts store __________________ 71 Cheyenne super 2 tone green and white ZZ6 - Th350 4/6 drop 20x8.5 / 20x10 Billet Specialties

04-02-2002, 12:25 PM	#3
WHYBYNU WHYBYNU when old will do Join Date: Feb 2002 Location: Hot Springs, AR. Posts: 643	Messed up that reply so I'll try it again. I kept getting the wrong starter I finally got the right one, you could tell it was right from the first time I started the truck it sounded tighter no griding, no shims. make sure the starter is the right one there were 2 diff. ones come up on the computer at the parts store (Advance Auto) for my truck 71 350/350. __________________ 71 Cheyenne super 2 tone green and white ZZ6 - Th350 4/6 drop 20x8.5 / 20x10 Billet Specialties



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.