Fires but won't stay running

[BLK96]

Should have added that terminal in fuse block

[69 long wide]

Originally Posted by BLK96

Should have added that terminal in fuse block

With the key in the on position the terminal is not hot. Is that a switch problem? How do you get the switch out?

[mechanicalman]

Originally Posted by 69 long wide

With the key in the on position the terminal is not hot. Is that a switch problem? How do you get the switch out?

No way to tell without further diagnostics.

"No we have power through the switch all the way to the starter. There is no link between the key and the fuse block".

That's right, if you mean "fusible link".

"There is no link from the back side of the fuse block to the coil".

Right again, if you mean "fusible link".

"Do you know how to get the switch out"?

No, I've never had to replace one. I'd recommend verifying the fusible link is intact, and you can refer to the diagrams in this link. I like the one by vette vette, you will have to scroll down.

http://67-72chevytrucks.com/vboard/s...d.php?t=624417

Or, if you just want to replace your ignition switch, here you go.

http://67-72chevytrucks.com/vboard/s...d.php?t=343215

[LockDoc]

Originally Posted by 69 long wide

With the key in the on position the terminal is not hot. Is that a switch problem? How do you get the switch out?

As far as removing the switch, read through this thread. I posted the instructions in it. Read the whole thread before starting.

http://67-72chevytrucks.com/vboard/s...d.php?t=462981

Any questions post 'em up....

LockDoc