CPP Lowering Spindle

[betzboogieman]

No I don't. But that is a 1" rotor for sure and I can take the rotor off tomorrow and get a better pic of it

[lolife99]

As long as you know what size rotor it is doesn't matter to me which spindle you buy.
Here's what Summit Racing offers for the 1" rotors,....
http://www.summitracing.com/search/y...drop%20spindle

MAKE SURE YOU VERIFY THE SPINDLE IS FOR A 1" ROTOR.

[betzboogieman]

Lolife99, Have you ever had any issues with the Belltech Spindles (3200)? Reason I ask is that I have used Belltech in that past on other trucks with no issues, but I just recently installed a set of Belltech Drop spindles on an 03 Ford Lightning, the fit was horrible.

[lolife99]

Originally Posted by betzboogieman

Lolife99, Have you ever had any issues with the Belltech Spindles (3200)? Reason I ask is that I have used Belltech in that past on other trucks with no issues, but I just recently installed a set of Belltech Drop spindles on an 03 Ford Lightning, the fit was horrible.

No I haven't.
I installed them on my last truck.
And I also have another set that I bought for a different truck.
Belltech is my choice for all 67-72 and 73-87 trucks.
I have used ECE, McGaughy's and Western Chassis drop spindles without issue on C10 trucks.

[betzboogieman]

Well I just ordered a set of belltech spindles. Should turn out good. I will post some pics when I get it done.

OP, I didn't mean to high jack your thread. I just figured since you were having some issues I was trying to avoid, I would chime in. Thanks

[betzboogieman]

Got the front end done. New upper and lower ball joints with 3" Belltech spindles. Thanks Lolife99 for the information on getting the parts. Helped me out a lot.

[lolife99]

Your truck looks great!