LSx Engine Mount Adapter Plates - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 04-06-2014, 12:38 AM

A member asked me to make him another set of these, so I made an extra set to offer for sale. These come as shown in the picture for $56.00 shipped in the USA. If you would like this set, post here in this thread and either send me a PM here on the forum or an email to captainfab454@ hotmail dot com for payment details.

KMC3420 · 04-09-2014, 12:55 PM

Do you have any pictures of these installed and what mounts will they work with?

**Captainfab** · 04-10-2014, 02:22 AM

No I do not have any installed pics. Any Gen I small block engine mount will bolt up.

ksbrktracer · 04-11-2014, 12:41 AM

Hey Captain ... Any Idea where these put the engine in relation to oem sbc. forwards / backwards .... If so how much does it move..?

**Captainfab** · 04-11-2014, 11:06 PM

These should position the engine in the original Gen I location.

Willie Makeit · 04-12-2014, 10:06 AM

So, if I pulled a GEN1 SBC out of a truck, and bolted these on the LSx engine, the LSx will go back in the same spot the GEN1 was sitting allowing the bellhousing face to be in the same position as the old engine?

I'm asking because I removed a GEN1 that was mounted to a TH350. I want to keep the TH350's placement as is (to retain driveshaft and linkage) and mount the LSx to it.

Will your mounts work?

**Captainfab** · 04-12-2014, 11:07 AM

I have not installed a set of these, but that is what I understand from the dimensions I used to make these for other members. Someone that has installed a LSx with this style of adapter plate could give you a definite answer.

**PGSigns** · 04-12-2014, 09:44 PM

Most of these type of plates move the engine an 1 1/2 or more forward. This is to allow the head to clear the fire wall. The distance from the back of the head to the mounting surface for the bell housing is shorter on the LS engines. If the head was close before it will be in a bad place with the LS.
Jimmy

**Captainfab** · 04-21-2014, 11:49 PM

Here is a post that shows how these adapter plates position the engine. The text tells the position of the engine mount brackets.

http://www.67-72chevytrucks.com/vboa...6&postcount=18

**PGSigns** · 04-22-2014, 07:00 AM

Going by the drawings I have these are 1 1/4 forward if using the same location for the mounts on the frame. That should be a good spot for our trucks. (60 to 66) to get off the fire wall.
Jimmy

mcm1209 · 04-25-2014, 04:25 PM

I got s front crossmember out of an 85. Will these work with the new style engine mounts?

**Captainfab** · 04-25-2014, 11:51 PM

Yes. As stated above, these will work with all Gen I small block engine mounts. They will also work with Gen II and Big block engine mounts since the bolt pattern is the same for all of them

Quote:

Originally Posted by mcm1209

I got s front crossmember out of an 85. Will these work with the new style engine mounts?

**Captainfab** · 05-07-2014, 11:18 PM

These have been sold.

LS64C10 · 10-01-2014, 08:13 AM

Captainfab do you have anymore of these adapter plates laying around?

**Captainfab** · 10-01-2014, 11:35 PM

No I do not. I can make more upon request though. I replied to your PM.

Quote:

Originally Posted by LS64C10

Captainfab do you have anymore of these adapter plates laying around?

04-06-2014, 12:38 AM	#1
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	LSx Engine Mount Adapter Plates A member asked me to make him another set of these, so I made an extra set to offer for sale. These come as shown in the picture for $56.00 shipped in the USA. If you would like this set, post here in this thread and either send me a PM here on the forum or an email to captainfab454@ hotmail dot com for payment details. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-09-2014, 12:55 PM	#2
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,065	Re: LSx Engine Mount Adapter Plates Do you have any pictures of these installed and what mounts will they work with? __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

04-10-2014, 02:22 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: LSx Engine Mount Adapter Plates No I do not have any installed pics. Any Gen I small block engine mount will bolt up. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-11-2014, 12:41 AM	#4
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: LSx Engine Mount Adapter Plates Hey Captain ... Any Idea where these put the engine in relation to oem sbc. forwards / backwards .... If so how much does it move..?

04-11-2014, 11:06 PM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: LSx Engine Mount Adapter Plates These should position the engine in the original Gen I location. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-12-2014, 10:06 AM	#6
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,234	Re: LSx Engine Mount Adapter Plates So, if I pulled a GEN1 SBC out of a truck, and bolted these on the LSx engine, the LSx will go back in the same spot the GEN1 was sitting allowing the bellhousing face to be in the same position as the old engine? I'm asking because I removed a GEN1 that was mounted to a TH350. I want to keep the TH350's placement as is (to retain driveshaft and linkage) and mount the LSx to it. Will your mounts work?

04-12-2014, 11:07 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: LSx Engine Mount Adapter Plates I have not installed a set of these, but that is what I understand from the dimensions I used to make these for other members. Someone that has installed a LSx with this style of adapter plate could give you a definite answer. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-12-2014, 09:44 PM	#8
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: LSx Engine Mount Adapter Plates Most of these type of plates move the engine an 1 1/2 or more forward. This is to allow the head to clear the fire wall. The distance from the back of the head to the mounting surface for the bell housing is shorter on the LS engines. If the head was close before it will be in a bad place with the LS. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

04-21-2014, 11:49 PM	#9
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: LSx Engine Mount Adapter Plates Here is a post that shows how these adapter plates position the engine. The text tells the position of the engine mount brackets. http://www.67-72chevytrucks.com/vboa...6&postcount=18 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-22-2014, 07:00 AM	#10
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: LSx Engine Mount Adapter Plates Going by the drawings I have these are 1 1/4 forward if using the same location for the mounts on the frame. That should be a good spot for our trucks. (60 to 66) to get off the fire wall. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

04-25-2014, 04:25 PM	#11
mcm1209 Registered User Join Date: Jul 2009 Location: Porter, Texas Posts: 115	Re: LSx Engine Mount Adapter Plates I got s front crossmember out of an 85. Will these work with the new style engine mounts?

05-07-2014, 11:18 PM	#13
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: LSx Engine Mount Adapter Plates These have been sold. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-01-2014, 08:13 AM	#14
LS64C10 Registered User Join Date: Sep 2014 Location: Loranger, LA Posts: 11	Re: LSx Engine Mount Adapter Plates Captainfab do you have anymore of these adapter plates laying around?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.