|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-04-2014, 08:09 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: Portsmouth, VA.
Posts: 21
|
1966 c20 front end conversion help
Purhased this truck about a year ago and previous owner converted the front end to disc brakes.I am trying to figure out which dropped spindles to purchase. Any help would be greatly appreciated as i am kinda new to these trucks.
|
|
|
|
10-05-2014, 12:05 AM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1966 c20 front end conversion help
The crossmember and control arms are '63-'66. By looking at the dust shield I think the spindles and rotors are '73-'87. The only difference between the '71-'72 spindles and the '73-'87 spindles are they take a different upper ball joint and I believe different tie rod ends.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
10-06-2014, 07:57 AM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: Portsmouth, VA.
Posts: 21
|
Re: 1966 c20 front end conversion help
Thanks for the response....So im guessing my best bet would be to detrermine what ball joints and tie rod ends are on there before ordering the dropped spindles?
|
|
|
|
|
10-06-2014, 10:16 PM
|
#4 |
|
Registered User
Join Date: Sep 2012
Location: Dallas, GA
Posts: 1,497
|
Re: 1966 c20 front end conversion help
It's got five lugs, so it's also C10 (half ton) stuff.
|
|
|
|
|
10-07-2014, 12:26 AM
|
#5 | |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1966 c20 front end conversion help
That would be a good idea. However those tierods are looking kind of sad, so it might be time for some new ones anyway. You might pickup a '73-'87 C10 tierod and see if it fits the arm on the spindle.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
|
10-07-2014, 11:45 AM
|
#6 |
|
Registered User
Join Date: Apr 2013
Location: Portsmouth, VA.
Posts: 21
|
Re: 1966 c20 front end conversion help
Sounds like a plan i appreciate it, The whole suspension is getting ready to be gone thru during the air suspension install.
|
|
|
|
|
10-07-2014, 10:44 PM
|
#7 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: 1966 c20 front end conversion help
Well if you are going to rebuild the front suspension, the particular year of those spindles is not an issue. Just get whichever spindles you like, '71-'72 or '73-'87, and buy the correct ball joints and tierods for the dropped spindles.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
