Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-01-2012, 12:36 AM | #1 |
Registered User
Join Date: Jul 2011
Location: vacaville ca
Posts: 1,304
|
72, water on floor board, from?
ok, I had the truck since summer and now that it is raining pretty darn good I noticed the passenger side floor was wet. I know I have a new window and window seal on the front and door trim seals. so my question is, where are the possible locations and or places on the cab that will leak... where do I start looking
__________________
04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP SOLD 1972 chevy c10 |
12-01-2012, 12:41 AM | #2 |
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: 72, water on floor board, from?
i think you may have answered your own question. Before I read the second half of your thread, I was going to guess the window seal. Then when I read you just had the window+seal replaced, that kind of seals the deal (no pun intended). if you paid a shop, take it back and have them re-do, even though a pain in the butt. Possibly lower passenger side of windhsield seal leaking.
|
12-01-2012, 12:44 AM | #3 |
Junior Member
Join Date: Dec 2006
Location: Southeast Missouri
Posts: 2,436
|
Re: 72, water on floor board, from?
Underneath the cowl there are quite a few areas where there are sealant where parts come together. Over the years this sealant will harden and crack.
Also water can come in around the windshield wiper motor shaft under the cowl. These are just a few areas, hopefully others will add more info.
__________________
'67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E. |
12-01-2012, 12:46 AM | #4 |
Registered User
Join Date: Jul 2011
Location: vacaville ca
Posts: 1,304
|
Re: 72, water on floor board, from?
I know its not the window or seal. replaced in summer, numerous wash jobs and no leaks..... I will look undedr the cowl and surounding areas
__________________
04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP SOLD 1972 chevy c10 |
12-01-2012, 12:56 AM | #5 |
Registered User
Join Date: Oct 2001
Location: Grapevine, Tx.
Posts: 2,142
|
Re: 72, water on floor board, from?
Maybe the antenna cable hole in the cab
Cowl vent drain clogged with leaves
__________________
John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS |
12-01-2012, 01:11 AM | #6 |
Registered User
Join Date: Mar 2010
Location: Scranton,Pa
Posts: 423
|
Re: 72, water on floor board, from?
I know my truck personally does this only when I take it through the car wash. I end up with a pool of water on the passenger side floor mat. On my truck it is a hole in the cowl that drops straight down into the passenger floor. It's not big but you notice it when you pressure wash it. Try on a sunny day looking up from your passenger side floorboard you will see where the water is coming from.Must be a Chevy thing.
Posted via Mobile Device
__________________
"When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car. " |
12-01-2012, 01:17 AM | #7 |
What?
Join Date: Jun 2007
Location: Southern California
Posts: 7,617
|
Re: 72, water on floor board, from?
Check the antenna cable, and where it comes in from the outside.
Have seen it where the water will follow the cable, and drip where the cable droops the lowest. Usually right where the passengers feet would be. Take some silicone and seal the hole where the cable comes through.
__________________
Chris 1968 K20 Suburban 1972 K10 LWB PU |
12-01-2012, 02:26 AM | #8 |
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: 72, water on floor board, from?
Ah, sorry, I kinda read your thread thinking you replaced them and then, all of a sudden, a leak... If lots of water exposure and no problems, then no, probably good there. Once a new seal is proven good, it'll be good a long time probably. Sorry bout the confusion.
|
12-01-2012, 02:34 AM | #9 |
VA72C10
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
|
Re: 72, water on floor board, from?
I agree on the inner cowl being suspect #1. My 67 had a spot where the sealer was out and leaked onto the passenger floorboard.
Posted via Mobile Device
__________________
Looking for a 67-72 swb or blazer project in or around VA. |
12-01-2012, 05:44 AM | #10 |
Registered User
Join Date: Dec 2004
Location: Hayward, CA
Posts: 124
|
Re: 72, water on floor board, from?
When mine leaked it was through the hole for the antenna wire. There is a rubber gromit that fits into this hole and allows the wire to run through it. I popped the gromit back into the hole and haven'tad a problem since.
|
12-01-2012, 10:11 AM | #11 | |
Registered User
Join Date: Jun 2010
Location: San Diego Co.
Posts: 1,179
|
Re: 72, water on floor board, from?
Quote:
Posted via Mobile Device
__________________
1972 Chevy C-10, SWB, Fleet, 350/350, PS, PB, HEI, mostly stock, Survivor. |
|
12-01-2012, 10:39 AM | #12 |
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: 72, water on floor board, from?
So, your kick panels are rust-free? Is there no dirt/trash accumulated in the base of that panel, like just inside the vents?
The previous owner of my truck was trying to find the source of similar leaks to your and used the wrong silicone sealer and created a swiss-cheesed firewall, along with a lackametal around the wiper motor....which fell out one morning....in the rain. So, after you take the plenum grille off from in front of the windshield, you'll have better views.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
12-01-2012, 11:54 AM | #13 |
Registered User
Join Date: Jan 2012
Location: Whitesboro, Texas
Posts: 932
|
Re: 72, water on floor board, from?
Possibly your heater core?
__________________
Cheers - Wayne Our Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=620966 '55 Wagon Build - http://67-72chevytrucks.com/vboard/s...d.php?t=689157 1971 Cheyenne Super Ochre/White LWB 350 Auto - my son's truck "Nancy" 1972 GMC K2500 Custom 4X4 Olive LWB 400 SB 4-speed -"Greenie" - Restoration to begin after the '55 Nothing sucks more than that moment during an argument when you realize you're wrong. |
12-01-2012, 12:23 PM | #14 |
Registered User
Join Date: Mar 2012
Location: Okanagan Valley, BC, Canada
Posts: 1,237
|
Re: 72, water on floor board, from?
check your drip rail sealant above the windshield. If its old and cracked that could be a problem also.
__________________
#teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497 |
12-01-2012, 12:35 PM | #15 | |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,770
|
Re: 72, water on floor board, from?
Quote:
|
|
12-01-2012, 12:46 PM | #16 |
Registered User
Join Date: Jul 2011
Location: vacaville ca
Posts: 1,304
|
Re: 72, water on floor board, from?
i will pull her in the garage today and take a look....... thanks all for the possibles
__________________
04 CHEVY LLY LS DURAMAX 4WD. MODS TO FOLLOW, EFI LIVE, BUILT TRANS, LBZ MP, LIFT PUMP SOLD 1972 chevy c10 |
10-29-2014, 11:13 PM | #17 |
Registered User
Join Date: Jul 2014
Location: Missouri city tx 77489
Posts: 4
|
Re: 72, water on floor board, from?
I have a second 72 chevy a lwb. Recently my daily driver was hit by a ford
and totaled out a 2003 chevy truck no notes. I had to start driving the old chevy daily. When it rained water fell right on my left foot and I noticed the passenger side the same. I have read the replies and tore all that applies apart,I find one part not mentioned. The channel that holds the electricals for starter engine temp etc held on by 3 5/16 screws need to be pulled and sealed it has factory sealant inside front on that channel with a seam all the way across the cowling area. I"ve done that it is suppose to rain here in tx tomorrow I will find out first hand and post a reply to this one. Before u mention it I know I could run the water hose. If there is no rain I will. |
10-29-2014, 11:46 PM | #18 |
Senior Member
Join Date: Jul 2009
Location: Exeter, NH
Posts: 794
|
Re: 72, water on floor board, from?
|
10-29-2014, 11:55 PM | #19 |
Registered User
Join Date: Jun 2014
Location: New Bern, NC
Posts: 177
|
Re: 72, water on floor board, from?
Mine has a rust hole behind the glove box. It leaks on top of the AC box and then drips on the floor.
__________________
1971 Cheyenne Super - Factory Big Block - Second (1987-89) & Fourth (2014-) Owner - To be restored 1978 Turbo Malibu - Owned since 1986 1987 Grand National Aerocoupe -1 of 1 1988 LeSabre T-Type - Supercharged |
10-30-2014, 10:23 PM | #20 |
Registered User
Join Date: Jul 2014
Location: Missouri city tx 77489
Posts: 4
|
Re: 72, water on floor board, from?
I already have a new core. I will install it before it gets to cold will keep
u posted on progress. |
10-31-2014, 09:06 AM | #21 |
Registered User
Join Date: Jan 2014
Location: Sacramento,California
Posts: 696
|
Re: 72, water on floor board, from?
Thats what I was going to suggest, does the water smell clean, or like antifreeze? I would suggest just running it inside the garage/shop for a bit out of the rain and see if it is leaking. If not, then you have a seal issue with the oitside world
__________________
Built not bought! My dad always tried to convince me HEI was pointless! Welding is a lot like sex, you don't have to be great with the rod as long as you thoroughly prep the surface and your good at grinding My build : 68 C10 Short Bed Conversion |
10-31-2014, 09:13 AM | #22 |
Registered User
Join Date: Jan 2014
Location: Sacramento,California
Posts: 696
|
Re: 72, water on floor board, from?
Oh, one other siggestion, is it carpet? If so you may want to look for a small hole in the foor pan, the carpet will wic the water over a larger area making it seemblike its a big leak, when its actually an old screw hole in the floor pan.... seen that befor first hand.
__________________
Built not bought! My dad always tried to convince me HEI was pointless! Welding is a lot like sex, you don't have to be great with the rod as long as you thoroughly prep the surface and your good at grinding My build : 68 C10 Short Bed Conversion |
10-31-2014, 09:15 AM | #23 |
Registered User
Join Date: Jan 2014
Location: Sacramento,California
Posts: 696
|
Re: 72, water on floor board, from?
Damnit!! Who revived this 2 year old thread....... I totally fell for it.... wha wha wha
__________________
Built not bought! My dad always tried to convince me HEI was pointless! Welding is a lot like sex, you don't have to be great with the rod as long as you thoroughly prep the surface and your good at grinding My build : 68 C10 Short Bed Conversion |
Bookmarks |
|
|