1956 3100 build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

56 3100 · 10-31-2014, 06:02 PM

been staying motivated. trying not to get discouraged by the $15,000 body and paint quotes I have been getting.

9" housing axle tubes can aparently be bent even before welding. here is jig for straightening axles tubes. I got info from another site works really well without heat.can turn round bar through all dummy bearing by hand now. outer dummy bearings were off about 1/8" to 3/16" in one direction or another. now I can progress with putting the rest of rear suspension together finally.

10-31-2014, 06:02 PM	#11
56 3100 Registered User Join Date: Jan 2005 Location: dartmouth,nova scotia,canada Posts: 339	Re: 1956 3100 build been staying motivated. trying not to get discouraged by the $15,000 body and paint quotes I have been getting. 9" housing axle tubes can aparently be bent even before welding. here is jig for straightening axles tubes. I got info from another site works really well without heat.can turn round bar through all dummy bearing by hand now. outer dummy bearings were off about 1/8" to 3/16" in one direction or another. now I can progress with putting the rest of rear suspension together finally. Attached Images Last edited by 56 3100; 10-31-2014 at 06:32 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.