TX WTB Serpentine setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**425HP409** · 11-01-2014, 10:51 PM

I am looking for a big block,serpentine setup

**chevy2tom** · 11-01-2014, 11:29 PM

I picked up a used March set (no a/c) great set up. Highly recommend!

**425HP409** · 11-01-2014, 11:56 PM

Quote:

Originally Posted by chevy2tom

I picked up a used March set (no a/c) great set up. Highly recommend!

I am looking for a factory set up with AC

**TBONE1964** · 11-02-2014, 01:19 AM

Quote:

Originally Posted by 425HP409

I am looking for a factory set up with AC

Check with board member tll74 (Tom). He specializes in very nice used factory set ups.

Hope this helps,
Tom

BigBlockBurris · 11-03-2014, 08:03 AM

Like This???

**425HP409** · 11-03-2014, 12:17 PM

Quote:

Originally Posted by BigBlockBurris

Like This???

Yes, like that, if that one is for a Big Block

BigBlockBurris · 11-03-2014, 03:15 PM

Yes.

It came off a early 90's 454 dually.

BBB

**425HP409** · 11-03-2014, 03:38 PM

Quote:

Originally Posted by BigBlockBurris

Yes.

It came off a early 90's 454 dually.

BBB

What are you asking for it?
Charles

BigBlockBurris · 11-03-2014, 04:05 PM

Charles,

That set-up is complete, just like I pulled it off the truck, however.....
There is a bracket that goes on the intake that i can't put my hands on, and the harmonic balancer pulley. I have both the bracket and pulley, I just can't find them at the moment. I have moved my shop several times and I know they are boxed up some where.
I was thinking $200 complete (with pulley and bracket) and $150 for what is pictured. You could fab the intake bracket, and the lower pulley could probably be bought new. I will continue to look for the pulley and bracket.

Please keep in mind, this is heavy. I can take it apart into two pieces for easy shipping, but it will be heavy.

Please let me know.
Thanks!

BBB

BigBlockBurris · 11-03-2014, 04:10 PM

I also meant to add that I am missing the water pump pulley.

I have them all, just putting my hands on them.
This is factory, 100% GM, so you would always be able to go into a parts house and get a belt for it, or alternantor, or anything for that matter.

BBB

**425HP409** · 11-05-2014, 05:58 PM

Quote:

Originally Posted by BigBlockBurris

I also meant to add that I am missing the water pump pulley.

I have them all, just putting my hands on them.
This is factory, 100% GM, so you would always be able to go into a parts house and get a belt for it, or alternantor, or anything for that matter.

BBB

I am interested in the complete setup with all pulleys etc. Please see if you can find the rest of the stuff.
Charles

11-01-2014, 10:51 PM	#1
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 841	WTB Serpentine setup I am looking for a big block,serpentine setup __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

11-01-2014, 11:29 PM	#2
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: WTB Serpentine setup I picked up a used March set (no a/c) great set up. Highly recommend!

11-03-2014, 08:03 AM	#5
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: WTB Serpentine setup Like This??? Attached Images

11-03-2014, 03:15 PM	#7
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: WTB Serpentine setup Yes. It came off a early 90's 454 dually. BBB

11-03-2014, 04:05 PM	#9
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: WTB Serpentine setup Charles, That set-up is complete, just like I pulled it off the truck, however..... There is a bracket that goes on the intake that i can't put my hands on, and the harmonic balancer pulley. I have both the bracket and pulley, I just can't find them at the moment. I have moved my shop several times and I know they are boxed up some where. I was thinking $200 complete (with pulley and bracket) and $150 for what is pictured. You could fab the intake bracket, and the lower pulley could probably be bought new. I will continue to look for the pulley and bracket. Please keep in mind, this is heavy. I can take it apart into two pieces for easy shipping, but it will be heavy. Please let me know. Thanks! BBB

11-03-2014, 04:10 PM	#10
BigBlockBurris Registered User Join Date: Nov 2001 Location: Concord,NC,USA Posts: 743	Re: WTB Serpentine setup I also meant to add that I am missing the water pump pulley. I have them all, just putting my hands on them. This is factory, 100% GM, so you would always be able to go into a parts house and get a belt for it, or alternantor, or anything for that matter. BBB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.