FL WTB Pullies & Intake Vac fitting

[Mr Handy]

Hi All, I'm trying to finish up my engine so I can get it in the truck and I need a few pieces.

1. A Pulley set for short water pump... single or double groove will work... If you have a pair of both I may take both sets. As long as they are straight I'm happy to clean and paint.

2. I also need the T fitting to connect trans VAC line and booster line... 3/8 NPT- 1/4" nipple-3/8 nipple... I think.

3. While I'm at it I might as well ask for a set of 4 Painted dog dish hubcaps for a c10... My truck is a base model, not many options and I would like to put back the painted caps. nothing fancy, just reasonably straightenable and not rusted out.

Thanks in advance,
Andy

[WETOWM]

I may have the vac tee also the pully set do you have p/s ?

[Mr Handy]

No I just have the alternator currently and plan to add ac at some point.

[michael bustamante]

I have a few different style vacuum tees. I can send you a pic if you like

[Mr Handy]

Pics would be awesome!

[michael bustamante]

Pics sent to you

[Mr Handy]

Originally Posted by michael bustamante

Pics sent to you

Got the pics, I'm trying to find one with the barbs on opposite sides. seems like the vac line for the trans needs to come off one side and the line for the booster off the other... I'm thinking I will have to pull the one off the old motor and clean it up.
thanks for taking the time to take and send the pics.

[michael bustamante]

No problem bud. I bet someone on here has a true "T" tee

[hardwaycooke]

Originally Posted by Mr Handy

Hi All, I'm trying to finish up my engine so I can get it in the truck and I need a few pieces.

1. A Pulley set for short water pump... single or double groove will work... If you have a pair of both I may take both sets. As long as they are straight I'm happy to clean and paint.

2. I also need the T fitting to connect trans VAC line and booster line... 3/8 NPT- 1/4" nipple-3/8 nipple... I think.

3. While I'm at it I might as well ask for a set of 4 Painted dog dish hubcaps for a c10... My truck is a base model, not many options and I would like to put back the painted caps. nothing fancy, just reasonably straightenable and not rusted out.

Thanks in advance,
Andy

I have original T fitting still on my old manifold I removed 3 months ago.

Also I recently added PS so I wet thru a lot of pulleys. I have crank dbl and single add-on for it.

I have another crank cast dbl.

I have water pump dbl and single for Short pump.

Also have couple alt pulleys.

Some are powdercoated dull chrome. I can send better pics of everything tomorrow if you are interested. Thanks

[Mr Handy]

I'm definitely interested in the T fitting and either a set of water pump and crank Pulleys single or double... or maybe both. Hoping for just painted pulleys as I want to stick with a fairly stock look and have the black paint for them.

Originally Posted by hardwaycooke

I have original T fitting still on my old manifold I removed 3 months ago.

Also I recently added PS so I wet thru a lot of pulleys. I have crank dbl and single add-on for it.

I have another crank cast dbl.

I have water pump dbl and single for Short pump.

Also have couple alt pulleys.

Some are powdercoated dull chrome. I can send better pics of everything tomorrow if you are interested. Thanks

[hardwaycooke]

Originally Posted by Mr Handy

I'm definitely interested in the T fitting and either a set of water pump and crank Pulleys single or double... or maybe both. Hoping for just painted pulleys as I want to stick with a fairly stock look and have the black paint for them.

will take pics tomorrow evening and send. thx

[FirstOwner69]

Is this the vacuum fitting you are looking for?

https://www.paragoncorvette.com/p-35...m-fitting.aspx

[Mr Handy]

Originally Posted by FirstOwner69

Is this the vacuum fitting you are looking for?

https://www.paragoncorvette.com/p-35...m-fitting.aspx

Yup that's the one. I have one on my current engine, but was planning to keep that engine complete when I pull it in hopes it will be easier to sell as a running engine. and in hopes I can have my new one 100% ready to drop in.
I cant see paying $30 with shipping for a fitting I can make with spare parts and a torch... I thought I would see if anyone has a bunch laying around because I know it came on more than vets.

[hardwaycooke]

Heres what I have. The vacuum port is a single. Sorry. See pic. I have lots of combinations of pulleys and some brackets. Some are PC but should be able to prep and paint. Just let me know. Thanks

[hardwaycooke]

Heres some additional pics.