NO MORE SWAPING 3/4 to 1/2 ton front ends

[stsalvage]

I think i found a company that makes spindles for 1963-- 1970 that take the 3/4 ton ball joint and uses all of the stock Tie rod ends and Pittman arm and all the linkage for 258.12
Please call them on shipping.

These are stock spindles Not lowing spindles But they do make lowering spindles

All of you new guys that have 3/4 ton trucks your worries are over Now a 5 lug wheels are in sight.

Now all you have to do is find a 1/2 ton Rear end change the rear springs and the front springs and you will have a 1/2 ton truck better gas mileage and you can put them Alum 5 lug rims on your ride.

The guys using the rear coil Springs you will need to find a Coil spring 1/2 rear end But this is for the guys that have the Leaf spring Rear ends

Part Number CP4S12

This is At CCP they Make front end parts for all trucks

Comes with a Life time Warranty

There in Calif

phone number 1-888-522-8303

I talk to a guy named Mario

They make them for the 2.5 drop spindles as well

All of the Disc bakes from the 1971-72 will work on these spindles

Now i know there will be a ton of you guys that will be
transferring your 3/4 trucks to 1/2 ton with out having to swap front ends

I remembered my Baha friend using some ones spindle that took the 3/4 ton ball joint

and using it on a 1/2 ton spindle

So all you guys swapping out your front ends that have no

Alignment problems your worries are Over Give them a call they do ship as well