VA WTB: Pre-85 4wd tranny cross member - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 11-16-2014, 06:46 PM

I need it for my 4 spd swap. I'd like one from the early 80s if possible. Post/send me some pics. Thanks,

Jim

**old Rusty C10** · 11-16-2014, 11:32 PM

I have a 79 one here has some surface rust I will get pics you can have it cheap

**JIMs70GMC** · 11-17-2014, 07:32 AM

Sounds good Bob.

**old Rusty C10** · 11-17-2014, 05:22 PM

bear in mind that it is raining like I should be building an ark here I pulled it out of the bare cab where it was laying and put it on a table in my office.. If you want me to clean it up and dry it off maybe I can do that tomorrow or Wednesday but here you get the general idea

**JIMs70GMC** · 11-17-2014, 06:43 PM

Looks solid to me. can you make sure it is 33" across. How much you want and shipping to 23323. Thanks,

Jim

**old Rusty C10** · 11-17-2014, 07:38 PM

measuring it across the top with the lower part down I get exactly 33 inches across. 3 3/4 tall and about 7 inches wide
I will go to the post office tomorrow and see if I can find a flat rate box . If that doesn't work I will go to the UPS store and get you a shipping price

**JIMs70GMC** · 11-18-2014, 07:11 AM

Sounds good. Thanks!

**old Rusty C10** · 11-18-2014, 04:59 PM

What a day I had first I went to staples which allegedly is a UPS store. the girl in there had no clue how to ship the item.. she didn't have a box then she didn't know if I could just put a plate on it and put a label on it, so I had to find a UPS store as the post office doesn't want to ship it either.
UPS store said it would cost $30.82 to ship it if I put a plate on it with the sticker because there is some kind of thing that if a shipment is unpackaged item has a ten dollar upcharge,
They did have a box to put it in and that would lower the cost to $20 or so but the box costs $10 so we are back to like $31 for shipping.
Make me an offer of what you think is fair if this shipping didn't put an end to this due to cost

**JIMs70GMC** · 11-18-2014, 09:51 PM

$65 shipped?

**old Rusty C10** · 11-18-2014, 09:57 PM

fair enough Im happy I will PM you my address

**old Rusty C10** · 11-22-2014, 12:32 PM

according to the computer it arrived?

**JIMs70GMC** · 11-22-2014, 10:20 PM

I'm sorry Bob. Got busy around the house. it has arrived. Thanks!

11-16-2014, 06:46 PM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	WTB: Pre-85 4wd tranny cross member I need it for my 4 spd swap. I'd like one from the early 80s if possible. Post/send me some pics. Thanks, Jim __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-16-2014, 11:32 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member I have a 79 one here has some surface rust I will get pics you can have it cheap __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-17-2014, 07:32 AM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: WTB: Pre-85 4wd tranny cross member Sounds good Bob. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-17-2014, 05:22 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member bear in mind that it is raining like I should be building an ark here I pulled it out of the bare cab where it was laying and put it on a table in my office.. If you want me to clean it up and dry it off maybe I can do that tomorrow or Wednesday but here you get the general idea Attached Images __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-17-2014, 06:43 PM	#5
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: WTB: Pre-85 4wd tranny cross member Looks solid to me. can you make sure it is 33" across. How much you want and shipping to 23323. Thanks, Jim __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-17-2014, 07:38 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member measuring it across the top with the lower part down I get exactly 33 inches across. 3 3/4 tall and about 7 inches wide I will go to the post office tomorrow and see if I can find a flat rate box . If that doesn't work I will go to the UPS store and get you a shipping price __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-18-2014, 07:11 AM	#7
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: WTB: Pre-85 4wd tranny cross member Sounds good. Thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-18-2014, 04:59 PM	#8
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member What a day I had first I went to staples which allegedly is a UPS store. the girl in there had no clue how to ship the item.. she didn't have a box then she didn't know if I could just put a plate on it and put a label on it, so I had to find a UPS store as the post office doesn't want to ship it either. UPS store said it would cost $30.82 to ship it if I put a plate on it with the sticker because there is some kind of thing that if a shipment is unpackaged item has a ten dollar upcharge, They did have a box to put it in and that would lower the cost to $20 or so but the box costs $10 so we are back to like $31 for shipping. Make me an offer of what you think is fair if this shipping didn't put an end to this due to cost __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-18-2014, 09:51 PM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: WTB: Pre-85 4wd tranny cross member $65 shipped? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-18-2014, 09:57 PM	#10
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member fair enough Im happy I will PM you my address __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-22-2014, 12:32 PM	#11
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	Re: WTB: Pre-85 4wd tranny cross member according to the computer it arrived? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

11-22-2014, 10:20 PM	#12
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: WTB: Pre-85 4wd tranny cross member I'm sorry Bob. Got busy around the house. it has arrived. Thanks! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.