Steering column parts questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ace of shades · 11-28-2014, 12:22 AM

I have the classic floppy wheel sydrome, so I pulled everything apart and found that the 4 screws are tight, But have no bearings. What is left of the lower race is still there and I think there was part of the upper race/keeper still there.
I have spent a while looking for replacement bearings and parts, but everything I keep coming up says it only fits ____ (jeeps or A/G body). I did find parts that fit a 78 and up truck column, but I'm sitting here looking at an early year 77 K20 that is stuck in the driveway.

QUESTION - Did GM change that much in the tilt column between the years and car/truck, or will the bearings I need be generic part for a GM tilt

11-28-2014, 12:22 AM	#1
ace of shades NEWBIE!! Join Date: Mar 2009 Location: Prineville OR Posts: 114	Steering column parts questions I have the classic floppy wheel sydrome, so I pulled everything apart and found that the 4 screws are tight, But have no bearings. What is left of the lower race is still there and I think there was part of the upper race/keeper still there. I have spent a while looking for replacement bearings and parts, but everything I keep coming up says it only fits ____ (jeeps or A/G body). I did find parts that fit a 78 and up truck column, but I'm sitting here looking at an early year 77 K20 that is stuck in the driveway. QUESTION - Did GM change that much in the tilt column between the years and car/truck, or will the bearings I need be generic part for a GM tilt __________________ Water is for the weak I don't like cocaine.. I just like the smell of it "Well there might be a dime up a goats ass too, but I ain't looken" - Grandpa VolksRods



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.