04-21-2011, 02:51 PM | #1 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Patches
I deleted my last build post because I thought the title was stupid.
My Mimi called the truck I am building patches because of the bondo and multicoplored panels. So I will name the thread patches Here is my build that I started in 2003. It was a truck given to me by my father. He passed on October 20, 2003 shortly after giving it to me. TX_Firefighter and ShanesChevy have served as my go to people for advice on this build and would not have been able to get this far without them. Here is what started the frame off rebuild. I pulled the bed and found that the frame was almost rusted in two. So I started by finding a new frame.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:52 PM | #2 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
I got a 1972 frame from Mr. Shelly that he was kind enough to haul all the way from Kilgore for me.
I cleaned it real well and removed all the rust with a wire wheel on a grinder. I also sanded the places that it missed
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:52 PM | #3 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Then we primed it with Rusty Metal Primer from tractor supply
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:53 PM | #4 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
My little girl helped me with the work while staying safe doing so.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:53 PM | #5 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Painted the frame with Loss Gloss Black from Tractor Supply. All new Moog front end rebuild. Swapped on a sway bar from a 3/4 ton 73-87 Chevy truck. Dropped 5 ½” using dearched rear springs and hangers in the back. Drop spindles and springs in the front for 4 ½ inch drop.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:54 PM | #6 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Added a Blazer tank w/ an inline fuel filer off an 90’s chevy truck
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:54 PM | #7 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
A big gap where the angel got older
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:55 PM | #8 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
I wanted to remove the old cab off the old frame. I rigged this simple lift from a couple of ideas found here on the board
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:55 PM | #9 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Taking the cab off the old frame
The Cab off the frame
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:56 PM | #10 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Picture of my engine and trans
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:57 PM | #11 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Installing the engine.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 02:57 PM | #12 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Finally have it installed. I had to put it on ramps because it was too low to get hoist under the front end.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
04-21-2011, 07:26 PM | #13 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
I am going to try to be vigilant in making progress on the truck. Here is what I did last night. Wirewheeled, Primed and Painted. Will work on striping core support tomorrow.
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) Last edited by Primered_69; 04-21-2011 at 07:27 PM. |
04-22-2011, 11:44 AM | #14 |
'67 C-10 LWB Driver
Join Date: Dec 2010
Location: Andover, Kansas
Posts: 380
|
Re: Patches
keep up the great work! engine is looking killer!
__________________
'67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! |
04-22-2011, 07:30 PM | #15 |
Registered User
Join Date: Jan 2008
Location: greenfield indiana
Posts: 241
|
Re: Patches
Lookin' good so far.I love watching these chevy trucks being restored.
__________________
1991 1500 longbed: my daily driver 1937 chevy 2dr sedan. dads project |
05-23-2011, 09:20 PM | #16 |
Registered User
Join Date: Sep 2002
Location: DFW Texas
Posts: 2,269
|
Re: Patches
Keep at it!! Looking REAL GOOD!!
|
11-22-2011, 01:50 PM | #17 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Finished stripping and painting core support. Will try to get the firewall cleaned and painted before Christmas. Fenders are getting the trim holes filles and primed
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
11-22-2011, 02:24 PM | #18 |
67cheby
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: Patches
looking good, keep up the progress
|
12-07-2011, 12:00 PM | #19 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Trim Holes filled initial sanding done
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) Last edited by Primered_69; 12-07-2011 at 12:11 PM. |
12-09-2014, 04:48 AM | #20 |
Registered User
Join Date: Sep 2002
Location: Fort Worth
Posts: 1,409
|
Re: Patches
Cut the frame down to make it a short bed
__________________
1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together) |
Bookmarks |
|
|