Door Lock Actuators - The 1947 - Present Chevrolet & GMC Truck Message Board Network

monte0185 · 05-09-2014, 12:21 PM

Does anyone have any pics of where the door lock actuators go and how they connect up to the lock assembly. I need to replace a door but my original doesnt have it in it so i need to replace it. Was hoping for a good pic or two that way when i run to the junk yard that has what i need Ill know what all to get before hand. Oh drivers side preferably.

THanks,

LuckyLightning · 12-08-2014, 09:49 PM

Aw man, no answer to this one? I am currently in the exact same predicament (except my doors were already replaced by the PO but with no outside locks).

chengny · 12-09-2014, 06:59 PM

Here are some images showing a 1986 door strip that may - or may not - be useful:

LuckyLightning · 12-09-2014, 07:33 PM

Thanks chengny, this is my dilemma.

chengny · 12-09-2014, 08:12 PM

Here is some door hardware info for a 91:

That's about all I've got right now - I'll check for more later on.

LuckyLightning · 12-09-2014, 11:35 PM

Thanks chengny! I think figure 20 is what I needed to see.

05-09-2014, 12:21 PM	#1
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Door Lock Actuators Does anyone have any pics of where the door lock actuators go and how they connect up to the lock assembly. I need to replace a door but my original doesnt have it in it so i need to replace it. Was hoping for a good pic or two that way when i run to the junk yard that has what i need Ill know what all to get before hand. Oh drivers side preferably. THanks, __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

12-08-2014, 09:49 PM	#2
LuckyLightning Registered User Join Date: Nov 2005 Location: Round Rock, TX Posts: 348	Re: Door Lock Actuators Aw man, no answer to this one? I am currently in the exact same predicament (except my doors were already replaced by the PO but with no outside locks). __________________ Michael - 1962 C20 LB stepside (project thread) - sold - 1963 Chevy C10 LB stepside (donor) - 1963 Chevy C10 LB Custom flatbed (project thread) - sold - 1979 K20 LB fleetside (project thread) Favorite exchange on the board so far: ol_Curt: "Jason, do you have power steering?" jason65: "No, but I lift weights."

12-09-2014, 06:59 PM	#3
chengny Registered User Join Date: May 2007 Location: New Hampshire Posts: 349	Re: Door Lock Actuators Here are some images showing a 1986 door strip that may - or may not - be useful:

12-09-2014, 07:33 PM	#4
LuckyLightning Registered User Join Date: Nov 2005 Location: Round Rock, TX Posts: 348	Re: Door Lock Actuators Thanks chengny, this is my dilemma. __________________ Michael - 1962 C20 LB stepside (project thread) - sold - 1963 Chevy C10 LB stepside (donor) - 1963 Chevy C10 LB Custom flatbed (project thread) - sold - 1979 K20 LB fleetside (project thread) Favorite exchange on the board so far: ol_Curt: "Jason, do you have power steering?" jason65: "No, but I lift weights."

12-09-2014, 08:12 PM	#5
chengny Registered User Join Date: May 2007 Location: New Hampshire Posts: 349	Re: Door Lock Actuators Here is some door hardware info for a 91: That's about all I've got right now - I'll check for more later on.

12-09-2014, 11:35 PM	#6
LuckyLightning Registered User Join Date: Nov 2005 Location: Round Rock, TX Posts: 348	Re: Door Lock Actuators Thanks chengny! I think figure 20 is what I needed to see. __________________ Michael - 1962 C20 LB stepside (project thread) - sold - 1963 Chevy C10 LB stepside (donor) - 1963 Chevy C10 LB Custom flatbed (project thread) - sold - 1979 K20 LB fleetside (project thread) Favorite exchange on the board so far: ol_Curt: "Jason, do you have power steering?" jason65: "No, but I lift weights."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.