OH Upper Tailgate Molding - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968SWBBigBlock · 12-09-2014, 09:18 PM

I have used upper tailgate molding
I took this off of a gate that I had which was an early take off
The gate sat in a barn for many years so the molding needs a good buffing.
One part did get a little pealed up when I removed it from the gate. That area is shown in the pictures.
This includes the center and right and left moldings.
Center does have some pitting as shown in the photo
If you want better photos than I can upload here please let me know

$25.00 delivered

Paypal cash or check

Thanks

**nlped** · 12-09-2014, 09:35 PM

I'll take em. PM me a paypal address.

1968SWBBigBlock · 12-09-2014, 10:33 PM

Sold to NLPED

Thanks

Bill

**nlped** · 12-13-2014, 04:51 PM

Got it today. Matches the existing trim on Walter perfectly. Thanks

1968SWBBigBlock · 12-13-2014, 10:29 PM

Sweet!!!!!

12-09-2014, 09:18 PM	#1
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Upper Tailgate Molding I have used upper tailgate molding I took this off of a gate that I had which was an early take off The gate sat in a barn for many years so the molding needs a good buffing. One part did get a little pealed up when I removed it from the gate. That area is shown in the pictures. This includes the center and right and left moldings. Center does have some pitting as shown in the photo If you want better photos than I can upload here please let me know $25.00 delivered Paypal cash or check Thanks Attached Images __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

12-09-2014, 09:35 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Upper Tailgate Molding I'll take em. PM me a paypal address. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-09-2014, 10:33 PM	#3
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Upper Tailgate Molding Sold to NLPED Thanks Bill __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

12-13-2014, 04:51 PM	#4
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Upper Tailgate Molding Got it today. Matches the existing trim on Walter perfectly. Thanks __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-13-2014, 10:29 PM	#5
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Upper Tailgate Molding Sweet!!!!! __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.