What did you get done 12/14/14 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 12-14-2014, 10:41 PM

Unfortunately I didn't get anything done with my truck as im still waiting for clutch parts etc. That being said I did have abuddy of mine around all weekend. He is a foreign car guy and he had me go with him to purchase two Nissan 300Zx cars. One had a good motor and a junky body and the other was good on the body and interior and the motor was blown so we are stripping the one to build the other and he is parting the ugly one out too all here at my yard
Hope to have clutch parts soon will keep you updated
How about you all?

sgr60 · 12-14-2014, 11:33 PM

New power steering gear and XJ steering shaft installed. Nice to have a quiet gear and the leak gone!

D13 · 12-15-2014, 06:27 AM

Fired up my mill and started making a snow plow mount for my tractor. Once that is done i can get it out of the way and put the 87 in the barn and start work on it.

Eraser475 · 12-15-2014, 09:37 AM

I got my Tailgate to latch without me having to pull the handle and then close it.

Stepper86 · 12-15-2014, 01:51 PM

Finally found a power rack for the project and placed an order for steering joints and other parts needed for the conversion. I did not get much garage time this weekend, other than taking some measurements and cleaning up.

jlelec · 12-15-2014, 07:35 PM

Replaced my fuel tank sending unit. Easy fix!

**rs74** · 12-16-2014, 12:48 AM

Put new tires on the dually.

Eraser475 · 12-16-2014, 12:50 AM

I took the running boards off of my 82 and changed the front pumpkin oil.

**Gregski** · 12-16-2014, 03:30 AM

everything buttoned up that I had started on

- replaced leaky new freeze plug

- coolant change

- air blower assembly back on

- driver inner fender back on

- oil pan back on

- new oil filter

- changed the oil

- starter back on

- inspection/dust cover back on

- air cleaner back on

- front bumper back on

test drove and moved out of the garage for wife to park her HONDA back in, LOL

bigwheel15 · 12-16-2014, 04:20 AM

Took her for a 10 minute drive and discovered a random overcharge issue. Pulled in the driveway and noticed the volt gauge sitting near the 18 volt mark, burned some wires so im going to have to take a careful look at the cs144 at swap I done.

Just call me Sean · 12-16-2014, 09:20 AM

Sold the '87.

motornut · 12-16-2014, 10:42 AM

found some Christmas decorations to put up.
cleaned up from our first blast of winter

RDrancher · 12-16-2014, 10:59 AM

Installed aluminum bullet door lock knobs. Actually I just supervised...my 3 year old installed them while I drank a barley pop.

SCOTI · 12-16-2014, 01:57 PM

Finished the 'in-house' dually bed mods. Still to go are power washing the bottom side of things, bed liner sprayed, & then buffing the paint.....

12-14-2014, 10:41 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,277	What did you get done 12/14/14 edition Unfortunately I didn't get anything done with my truck as im still waiting for clutch parts etc. That being said I did have abuddy of mine around all weekend. He is a foreign car guy and he had me go with him to purchase two Nissan 300Zx cars. One had a good motor and a junky body and the other was good on the body and interior and the motor was blown so we are stripping the one to build the other and he is parting the ugly one out too all here at my yard Hope to have clutch parts soon will keep you updated How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

12-14-2014, 11:33 PM	#2
sgr60 Registered User Join Date: Nov 2014 Location: CT Posts: 105	Re: What did you get done 12/14/14 edition New power steering gear and XJ steering shaft installed. Nice to have a quiet gear and the leak gone! __________________ '84 K20 350/465/208

12-15-2014, 06:27 AM	#3
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you get done 12/14/14 edition Fired up my mill and started making a snow plow mount for my tractor. Once that is done i can get it out of the way and put the 87 in the barn and start work on it. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

12-15-2014, 09:37 AM	#4
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	Re: What did you get done 12/14/14 edition I got my Tailgate to latch without me having to pull the handle and then close it. __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

12-15-2014, 01:51 PM	#5
Stepper86 Registered User Join Date: Sep 2011 Location: Stockholm Posts: 263	Re: What did you get done 12/14/14 edition Finally found a power rack for the project and placed an order for steering joints and other parts needed for the conversion. I did not get much garage time this weekend, other than taking some measurements and cleaning up. __________________ Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint")

12-15-2014, 07:35 PM	#6
jlelec Registered User Join Date: Oct 2009 Location: Waynesboro, GA Posts: 70	Re: What did you get done 12/14/14 edition Replaced my fuel tank sending unit. Easy fix!

12-16-2014, 12:48 AM	#7
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: What did you get done 12/14/14 edition Put new tires on the dually. __________________ Roy 85 Short Bed Silverado- Work in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=564818 1987 R10 shortie

12-16-2014, 12:50 AM	#8
Eraser475 Registered User Join Date: Mar 2014 Location: Echo, MN Posts: 107	Re: What did you get done 12/14/14 edition I took the running boards off of my 82 and changed the front pumpkin oil. __________________ Dad's: 1973 Chevy C-60 Grain Truck 366 Big Block Dad's: 1982 Chevy Silverado 6.2L Diesel K-10 Dad's: 1987 Chevy Silverado TBI 350 R-10 Dad's: 2007 GMC Sierra Classic 2500HD SLT Mine: 1982 Chevy Silverado 6.2L Diesel K-10

12-16-2014, 03:30 AM	#9
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,820	Re: What did you get done 12/14/14 edition everything buttoned up that I had started on - replaced leaky new freeze plug - coolant change - air blower assembly back on - driver inner fender back on - oil pan back on - new oil filter - changed the oil - starter back on - inspection/dust cover back on - air cleaner back on - front bumper back on test drove and moved out of the garage for wife to park her HONDA back in, LOL

12-16-2014, 04:20 AM	#10
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: What did you get done 12/14/14 edition Took her for a 10 minute drive and discovered a random overcharge issue. Pulled in the driveway and noticed the volt gauge sitting near the 18 volt mark, burned some wires so im going to have to take a careful look at the cs144 at swap I done.

12-16-2014, 10:42 AM	#12
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: What did you get done 12/14/14 edition found some Christmas decorations to put up. cleaned up from our first blast of winter Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

12-16-2014, 10:59 AM	#13
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: What did you get done 12/14/14 edition Installed aluminum bullet door lock knobs. Actually I just supervised...my 3 year old installed them while I drank a barley pop. __________________ Romans 10:9 - The Truth

12-16-2014, 01:57 PM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,938	Re: What did you get done 12/14/14 edition Finished the 'in-house' dually bed mods. Still to go are power washing the bottom side of things, bed liner sprayed, & then buffing the paint..... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.