The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-26-2004, 02:31 PM   #1
WRMZ71
Cause the Chicks DIG IT!!
 
WRMZ71's Avatar
 
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
Unhappy What a weekend!!!

Well I knew i was getting myself into it this weekend when I'd be putting on my first set of rocker panels. I'd never done bodywork before but I was doing it at a college and had a guy with a lot of knowledge helping me out. Problem was after I took off the outer rocker the inner rocker panel towards the back of the cab was crustified and rotted. so I spent the next 6 hours cutting and welding and grinding and cutting.....well you get the point. Well my time limit ran out up at the shop and we had to leave but I didn't have the rocker panel in yet and the door was still off. I tried putting the door on but I couldn't get the dang thing lined up so I said what the hell it's nice today and it's only 20 miles to my house so I'll just drive with no door. Got some funny looks going down the highway for sure with no door. Well got home and went to a buddies house that had a welder and finished putting on the outer rocker and then was finally able to get the door put on so went home got showered up had a beer at a buddies house then went to bed. WEll then I woke up at about 1:30 in the morn and can't see a damn thing. It felt like i had something in my eye I tried flushing it out with water and then eye drops but it wasn't working so off to the ER I go. I got up there and the wife told em i had been welding so they automatically assume i burn my eyes. So they give me some eye drops to kill the pain and then they gave me a shot of morphine in my rearend that stuff works good mind you. well I got 2 days off of work now which is good but then again i jacked up my eyes. Well I hope everybodies weekend went a little smoother than mine have a good week ladies and gents ps sorry for the long post
WRMZ71 is offline   Reply With Quote
Old 01-26-2004, 02:51 PM   #2
gr8scott51
Registered User
 
gr8scott51's Avatar
 
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
Do NOT do like those idiots on Monster Garage. Wear a hood! Put raw potatoes over your eyes for flash burn. Seems to help. Good luck, Scott
__________________
Silence is golden, duct tape is silver. - Scott
gr8scott51 is offline   Reply With Quote
Old 01-26-2004, 03:06 PM   #3
ChrisK10
1971 C20 Custom Camper
 
ChrisK10's Avatar
 
Join Date: Mar 2003
Location: Ames/Shenandoah, IA
Posts: 1,435
Yes, safety first! I'd rather be safe than sorry... Hope you get well soon...
__________________
'71 Chevy C20 Custom Camper, 454, TH400

'97 GMC K1500 5.7L
ChrisK10 is offline   Reply With Quote
Old 01-26-2004, 03:14 PM   #4
Slammed67
Progress = 0%
 
Slammed67's Avatar
 
Join Date: Nov 2001
Location: Kansas City, MO
Posts: 2,108
I had something similar happen to be but it wasn't burned eyes, it was rust! I apparently had a small spack of metal dust in my eye and when I woke up, it had left a "rust ring" on the surface of my eye. I could see, but if felt like I had something in my eye and it was very red and irritated. Since it was on a Sunday, I went to the ER and they removed the piece of metal dust. The next day I went to my eye doctor where they "buffed" off the rust ring. The doctor "suggested" that I wear eye protection whenever grinding on metal. Now whenever I've been griding on metal or working in a dusty area, I always thoroughly check my eyes before I go to bed.
__________________
Jason - '67 GMC swb | '57 Bel-Air 4dr hardtop | '56 210 4dr Wagon | 2000 GMC Sierra
Slammed67 is offline   Reply With Quote
Old 01-26-2004, 04:32 PM   #5
WRMZ71
Cause the Chicks DIG IT!!
 
WRMZ71's Avatar
 
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
Thats what drove me nuts about the whole thing. I was wearing a helmet. I"m not the most seasoned of welders so before I really start I strike it to see where I'm at and then while it's still hot i can see where i'm starting at when i put on my hood. I think thats what got me. I feel fine today though so thats good, and i just got back from the optometrist and he said my eye has healed already so thanks for the concern gents and keep them chevy's purring like a kitten
WRMZ71 is offline   Reply With Quote
Old 01-26-2004, 06:21 PM   #6
Yukon Jack
Post Whore
 
Yukon Jack's Avatar
 
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
That sucks. Glad to hear there was no permanent damage. What do you want to bet your bills from the doctors would cover buying one of those helmets that automatically darkens.
__________________
1970 Blazer with a 400 sbc and 4" lift
1980 Pontiac Trans Am, 455 Oldsmobile
2012 Kawasaki Concours 14
Yukon Jack is offline   Reply With Quote
Old 01-26-2004, 07:05 PM   #7
onetoncrewcab
One of my kids. Cute eh?
 
onetoncrewcab's Avatar
 
Join Date: Oct 2001
Location: Mitchell, SD
Posts: 1,286
Sound like a weld burn to me too. It does not take long. I've worked as a welder for about 11 years at my previous jobs and I burned my eyes a couple of times. Due to laziness mostly. Not wanting to walk 15 feet to get the helmet.
MJ
__________________
If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did.

John 3:16
2006 Chevy HHR
2000 Dodge Durango
1985 Jeep CJ-7
1970 Chevy Pickup
onetoncrewcab is offline   Reply With Quote
Old 01-26-2004, 07:34 PM   #8
griesel72
Senior Member
 
griesel72's Avatar
 
Join Date: Apr 2003
Location: Howard, Kansas USA
Posts: 1,997
As a high school Ag teacher and welding instructor, i get welder "flash" burn about once every two months. Seems like one of my students are always striking the arc while i'm looking in their direction. i use the potato or cucumber treatment, seems to take the burn out.
__________________
1969 K10 Custom 10
1997 Z71
2006 Volkswagen Jetta TDI
2006 King Ranch
1980 Wife
griesel72 is offline   Reply With Quote
Old 01-26-2004, 07:44 PM   #9
72MARIO
Registered User
 
72MARIO's Avatar
 
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,051
I have had both things happen I was grinding and got a piece of steel in my eye. It was either a spark or a piece of cold steel. I did not go to the ER till the next night. I could not sleep all night and it killed to keep my eyes open all day. When I seen the doctor she said I had a rust ring on my eye and if I had waited another couple of hours I would have gone Blind. Thank goodness for Canada and there kicking health care system. I have had welding burn of my eyes too. Kind of feels like sand in your eyes all day. Well I know have a welding mask on at all times and I make sure that I have glasses on too.
Safety is a good thing to keep in mind you only have one set of eyes and I have way to hot of a Girlfriend to loose my eye sight.

Mario
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair
http://67-72chevytrucks.com/vboard/s...d.php?t=625017
1967 C/20 6.0/4L80 Roofing Truck
1990 V2500 Suburban "Plow Truck"
2005 TAHOE DD
72MARIO is offline   Reply With Quote
Old 01-26-2004, 09:33 PM   #10
zenish
Registered User
 
Join Date: Aug 2003
Location: stallings,nc
Posts: 401
mario,lets see pictures.
zenish is offline   Reply With Quote
Old 01-26-2004, 10:19 PM   #11
Blue Beard
Registered User
 
Blue Beard's Avatar
 
Join Date: Jan 2003
Location: Washington State
Posts: 8,831
If you decide to go with a auto-darkening hood try:

http://www.cyberweld.com

Bought mine through them.

Speedglass hood, well worth the money.
__________________
1970 Chev CST
2003 Harley Fatboy
1975 Chevrolet Step Van
1956 Chev Bel Air
1977 Blazer 2WD For Sale $3000.00
1978 Blazer 2WD For Sale $7000.00
1978 Silverado
2005 Monte Carlo
Blue Beard is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com