WI Tilt column original 67 72 truck all gm parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**60-66** · 11-18-2014, 01:11 PM

I have two completely rebuilt 67-72 Chevrolet and GMC original Column Shift truck tilts. All new bearings and parts as needed. All parts glass beaded and painted. Good original levers. These are complete and ready to install . $499.00 each shipped . Cash, Check, MO or Paypal.

**70shortfleet** · 11-18-2014, 04:44 PM

Where's the upper and lower boots? They have to be taken apart to get them on!

**60-66** · 11-19-2014, 10:04 AM

Thank you for pointing that out Les . I bought these this way when I was collecting 67-72 parts . So how hard is it at this point to put those parts on ? If someone wanted a little better deal because of this fact I'm open to a slightly better price to cover it. These are excellent straight tilts. Thanks,Jon

**70shortfleet** · 11-19-2014, 11:00 AM

To do the install the boots correct you just about have to take the column completely apart, not an easy install. I have seen guys bend over the bottom piece and slide the boots past them and bend them back but I don't recommend that because it will weaken the metal! You also will need the bottom bracket to hold the seal to firewall

Blazerback72 · 11-19-2014, 02:08 PM

What would be your best price on tilt?

bagged01extcab · 11-19-2014, 02:13 PM

Sent offer via pm

**60-66** · 11-19-2014, 03:00 PM

Quote:

Originally Posted by Blazerback72

What would be your best price on tilt?

I would do $425.00 shipped with Paypal

Quote:

Originally Posted by bagged01extcab

Sent offer via pm

Replied !

**60-66** · 11-22-2014, 11:47 AM

425.00 shipped. Keeping one.

**KevsClassics** · 11-24-2014, 12:21 PM

Quote:

Originally Posted by 60-66

Thank you for pointing that out Les . I bought these this way when I was collecting 67-72 parts . So how hard is it at this point to put those parts on ? If someone wanted a little better deal because of this fact I'm open to a slightly better price to cover it. These are excellent straight tilts. Thanks,Jon

They will work in a 60-66 with out the boots.

**60-66** · 11-24-2014, 02:17 PM

Thanks Kev, that's why I decided to keep one, other has been sold. Jon

**jimer1964** · 11-26-2014, 08:31 AM

Hi, would be interested in the one if you decide to sell. Thanks

**60-66** · 11-26-2014, 04:38 PM

First tilt sold to Ripp . Thank you !

**60-66** · 11-26-2014, 04:38 PM

Quote:

Originally Posted by jimer1964

Hi, would be interested in the one if you decide to sell. Thanks

Second one available if you still need.

rripp · 11-26-2014, 04:47 PM

Received. Looks like brand new. Absolutely perfect. Thank you!

**60-66** · 01-06-2015, 02:57 PM

Still have one more available all rebuilt.

**leddzepp** · 01-06-2015, 04:28 PM

Take a razor to the boots and a hacksaw to the lower mounting bracket. The boots will slip right on, and you can bend the bracket back

Minnz · 01-07-2015, 12:25 AM

I will take it and pm you tomorrow.

Thanks
Lee

11-18-2014, 01:11 PM	#1
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Tilt column original 67 72 truck all gm parts I have two completely rebuilt 67-72 Chevrolet and GMC original Column Shift truck tilts. All new bearings and parts as needed. All parts glass beaded and painted. Good original levers. These are complete and ready to install . $499.00 each shipped . Cash, Check, MO or Paypal. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-18-2014, 04:44 PM	#2
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: Tilt column original 67 72 truck all gm parts Where's the upper and lower boots? They have to be taken apart to get them on!

11-19-2014, 10:04 AM	#3
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Tilt column original 67 72 truck all gm parts Thank you for pointing that out Les . I bought these this way when I was collecting 67-72 parts . So how hard is it at this point to put those parts on ? If someone wanted a little better deal because of this fact I'm open to a slightly better price to cover it. These are excellent straight tilts. Thanks,Jon __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-19-2014, 11:00 AM	#4
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,226	Re: Tilt column original 67 72 truck all gm parts To do the install the boots correct you just about have to take the column completely apart, not an easy install. I have seen guys bend over the bottom piece and slide the boots past them and bend them back but I don't recommend that because it will weaken the metal! You also will need the bottom bracket to hold the seal to firewall

11-19-2014, 02:08 PM	#5
Blazerback72 Registered User Join Date: Nov 2014 Location: Benbrook TX Posts: 38	Re: Tilt column original 67 72 truck all gm parts What would be your best price on tilt? __________________ 72 Chevy cheyenne super short wide 350 69 SS Camaro 502 72 2wd Chevy Blazer (project) EVERY DAY IS A GOOD DAY IF YOUR ABOVE GROUND!!

11-19-2014, 02:13 PM	#6
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	Re: Tilt column original 67 72 truck all gm parts Sent offer via pm __________________ Trey Oney

11-22-2014, 11:47 AM	#8
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Tilt column original 67 72 truck all gm parts 425.00 shipped. Keeping one. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-24-2014, 02:17 PM	#10
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Tilt column original 67 72 truck all gm parts Thanks Kev, that's why I decided to keep one, other has been sold. Jon __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-26-2014, 08:31 AM	#11
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: Tilt column original 67 72 truck all gm parts Hi, would be interested in the one if you decide to sell. Thanks

11-26-2014, 04:38 PM	#12
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Tilt column original 67 72 truck all gm parts First tilt sold to Ripp . Thank you ! __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

11-26-2014, 04:47 PM	#14
rripp Registered User Join Date: May 2012 Location: Farmington MO Posts: 75	Re: Tilt column original 67 72 truck all gm parts Received. Looks like brand new. Absolutely perfect. Thank you!

01-06-2015, 02:57 PM	#15
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: Tilt column original 67 72 truck all gm parts Still have one more available all rebuilt. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

01-06-2015, 04:28 PM	#16
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Tilt column original 67 72 truck all gm parts Take a razor to the boots and a hacksaw to the lower mounting bracket. The boots will slip right on, and you can bend the bracket back __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

01-07-2015, 12:25 AM	#17
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Tilt column original 67 72 truck all gm parts I will take it and pm you tomorrow. Thanks Lee __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.