finally come - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 01-08-2015, 03:39 PM

carb data tag, found a guy that remakes them... with any info you want!!!

**pimpston65** · 01-08-2015, 03:42 PM

just need my special once over and itall be good as new!!!

**pimpston65** · 01-09-2015, 04:36 PM

got my trans guy puutting new front and rear seals and grinding the tail section to make it look original to a truck. he said the guts are perfect no need to rebuild!!!

**pimpston65** · 01-09-2015, 04:38 PM

now i have a pair of mirrors for the beast!!! nos baby...

**aerotruk63** · 01-09-2015, 05:24 PM

Save the original box as proof if every God forbid something happens to the truck. Advise I got from a buddy in the insurance estimator.

**pimpston65** · 01-09-2015, 07:25 PM

Quote:

Originally Posted by aerotruk63

Save the original box as proof if every God forbid something happens to the truck. Advise I got from a buddy in the insurance estimator.

I boxes on top of boxes, I did toss a few awhile back,but I been keepin em. Thks cool info so insurance pay out will be $$$$$$ and not $

duallyjams · 01-09-2015, 07:29 PM

Plus the boxes are just cool by there self.

cru_zn_29 · 01-11-2015, 12:32 PM

Winston did you get the antenna support?

**pimpston65** · 01-11-2015, 01:26 PM

Quote:

Originally Posted by cru_zn_29

Winston did you get the antenna support?

sorry bro, yes i got the support bracket!!! now i need to use my tumbler to clean it and stash it away, its engine mock up time cuz i know the 292's motor mounts need some adjustments!!!

**pimpston65** · 01-12-2015, 06:10 PM

got that 283 pulled and gave it away!!!

**pimpston65** · 01-12-2015, 06:11 PM

its all yours awbrown!!!

awbrown · 01-12-2015, 06:54 PM

And much appreciated !!! Thanks again !!

**pimpston65** · 01-12-2015, 07:56 PM

Quote:

Originally Posted by awbrown

And much appreciated !!! Thanks again !!

Glad you sent that PM today, talk about perfect timing!!! Don't forget about my fall off the bone ribs!!!

**nsb29** · 01-13-2015, 10:02 AM

Quote:

Originally Posted by pimpston65

its all yours awbrown!!!

an I complain about the winters in florida

**pimpston65** · 01-22-2015, 11:13 AM

found an NOS weatherstrip gasket for the burban and an NOS step for my p/u. not cheap!!!

**pimpston65** · 01-22-2015, 03:01 PM

More goodies. 30" block should do the trick, plus white lithium paste to get in all the tight places...

**pimpston65** · 01-22-2015, 08:34 PM

i snap'd a pic while cleaning the area for engine/trans mock up!!!

**pimpston65** · 01-31-2015, 12:54 PM

i mocked up my engine, in order to make sure i have all the correct bolts, still having a problem with the PS pulley. mine doesnt line up cuz i dont have the correct pulley. if i dont find the right one i may just sell the brackets and use the manual steering box...

65 C20 · 01-31-2015, 01:52 PM

Don't give up.
With your hunting skills you will find the right pulley.
Your girlfriend will enjoy the P/S.

**pimpston65** · 01-31-2015, 03:07 PM

Quote:

Originally Posted by 65 C20

Don't give up.
With your hunting skills you will find the right pulley.
Your girlfriend will enjoy the P/S.

thks for the encouragement, i have all the right stuff too i.e 4x4 powersteering box from a 76burban so i got the goods, just that darn pulley!!!

65sub · 01-31-2015, 03:46 PM

Pimpston show us some pictures of the pulley I have a couple of old ones here.

**pimpston65** · 01-31-2015, 05:08 PM

Quote:

Originally Posted by 65sub

Pimpston show us some pictures of the pulley I have a couple of old ones here.

this is it, see how its pushed out...

**southern parts** · 02-01-2015, 10:25 PM

it looks like the pulley is on backwards. here`s a pic of one that I had a few years ago. the part number on the pulley is 3906398

**60-66** · 02-02-2015, 11:00 AM

We went through all the PS and pulley differences here for 292

http://67-72chevytrucks.com/vboard/s...errerid=112036

**southern parts** · 02-02-2015, 12:08 PM

I would've never thought that pulley was on the correct way. Every days a school day

01-08-2015, 03:39 PM	#151
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come carb data tag, found a guy that remakes them... with any info you want!!! Attached Images

01-08-2015, 03:42 PM	#152
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come just need my special once over and itall be good as new!!! Attached Images Last edited by pimpston65; 01-08-2015 at 06:19 PM.

01-09-2015, 04:36 PM	#153
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come got my trans guy puutting new front and rear seals and grinding the tail section to make it look original to a truck. he said the guts are perfect no need to rebuild!!! Attached Images

01-09-2015, 04:38 PM	#154
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come now i have a pair of mirrors for the beast!!! nos baby... Attached Images

01-09-2015, 05:24 PM	#155
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: finally come Save the original box as proof if every God forbid something happens to the truck. Advise I got from a buddy in the insurance estimator. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

01-09-2015, 07:29 PM	#157
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: finally come Plus the boxes are just cool by there self. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

01-11-2015, 12:32 PM	#158
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: finally come Winston did you get the antenna support?

01-12-2015, 06:10 PM	#160
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come got that 283 pulled and gave it away!!! Attached Images

01-12-2015, 06:11 PM	#161
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come its all yours awbrown!!! Attached Images

01-12-2015, 06:54 PM	#162
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: finally come And much appreciated !!! Thanks again !!

01-22-2015, 11:13 AM	#165
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come found an NOS weatherstrip gasket for the burban and an NOS step for my p/u. not cheap!!! Attached Images

01-22-2015, 03:01 PM	#166
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come More goodies. 30" block should do the trick, plus white lithium paste to get in all the tight places... Attached Images

01-22-2015, 08:34 PM	#167
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come i snap'd a pic while cleaning the area for engine/trans mock up!!! Attached Images

01-31-2015, 12:54 PM	#168
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,192	Re: finally come i mocked up my engine, in order to make sure i have all the correct bolts, still having a problem with the PS pulley. mine doesnt line up cuz i dont have the correct pulley. if i dont find the right one i may just sell the brackets and use the manual steering box... Attached Images

01-31-2015, 01:52 PM	#169
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: finally come Don't give up. With your hunting skills you will find the right pulley. Your girlfriend will enjoy the P/S.



Register or Log In To remove these advertisements.

01-31-2015, 03:46 PM	#171
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: finally come Pimpston show us some pictures of the pulley I have a couple of old ones here. __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

02-01-2015, 10:25 PM	#173
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: finally come it looks like the pulley is on backwards. here`s a pic of one that I had a few years ago. the part number on the pulley is 3906398 Attached Images

02-02-2015, 11:00 AM	#174
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,325	Re: finally come We went through all the PS and pulley differences here for 292 http://67-72chevytrucks.com/vboard/s...errerid=112036 __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK

02-02-2015, 12:08 PM	#175
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,470	Re: finally come I would've never thought that pulley was on the correct way. Every days a school day

Register or Log In To remove these advertisements.