Are these factory seatbelts? Need help identifying please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

wugunguy · 04-27-2014, 06:51 PM

Been doing some cleaning and organizing around the shop to make room to start working on my truck again and have come across several boxes of seat-belts and need help identifying what each goes to and what makes a complete set. I have been away from the trucks for quite awhile and can't remember where I got all these.?.? Any help will be greatly appreciated! Thanks in advance.

The 1st box consist of these and I think they may go to a 69-72 Blazer but am not sure. Is this a complete set?

The 2nd box consist of these and I think they are shoulder & lap belts but not sure if they are for 67-72 Trucks?.?.

The 3rd box consist of these and I think they are for a 67-72 Pickup. What makes a complete set?

71 super · 04-27-2014, 09:31 PM

The shoulder set is not correct, the boot is a car version of some type can't be any help on 1 st set other than the look correct, third set is right for bench. Should have retractor for each side, buckle for eAch retractor and a third buckle and female for middle passenger.

**special-K** · 04-28-2014, 08:32 AM

Yes,the first set is a complete 69-72 K/5 set

**WIDESIDE72** · 01-14-2015, 02:45 AM

I have a question about the shoulder belts. I bought a set and the belts that mount on the pillar seem too long. I suppose i have them mounted correctly, with the belts witht the male tab on the pillar. I had a 71 el camino back in the day and it was like that. Could i get the length on these fro someone.

**FirstOwner69** · 01-14-2015, 03:33 AM

The male end mounts to the pillar. Looks like length is 28" per post 17 in the thread below.

http://67-72chevytrucks.com/vboard/s...d.php?t=455323

**WIDESIDE72** · 01-14-2015, 05:28 PM

Mine are about 40". I guess ill find an upholstery shop who can shorten and resew them.

04-27-2014, 06:51 PM	#1
wugunguy 70 C/10-Work in progress Join Date: Aug 2005 Location: Kansas Posts: 601	Are these factory seatbelts? Need help identifying please Been doing some cleaning and organizing around the shop to make room to start working on my truck again and have come across several boxes of seat-belts and need help identifying what each goes to and what makes a complete set. I have been away from the trucks for quite awhile and can't remember where I got all these.?.? Any help will be greatly appreciated! Thanks in advance. The 1st box consist of these and I think they may go to a 69-72 Blazer but am not sure. Is this a complete set? The 2nd box consist of these and I think they are shoulder & lap belts but not sure if they are for 67-72 Trucks?.?. The 3rd box consist of these and I think they are for a 67-72 Pickup. What makes a complete set? __________________ In the garage 1999 Dodge Dakota Sport-Daily Driver 1972 Chevy K/5 CST AC/PS/PB/4x4/Tow Hooks/Tilt 1970 Chevy C/10-Current project

04-27-2014, 09:31 PM	#2
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,079	Re: Are these factory seatbelts? Need help identifying please The shoulder set is not correct, the boot is a car version of some type can't be any help on 1 st set other than the look correct, third set is right for bench. Should have retractor for each side, buckle for eAch retractor and a third buckle and female for middle passenger. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

04-28-2014, 08:32 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: Are these factory seatbelts? Need help identifying please Yes,the first set is a complete 69-72 K/5 set __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-14-2015, 02:45 AM	#4
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Are these factory seatbelts? Need help identifying please I have a question about the shoulder belts. I bought a set and the belts that mount on the pillar seem too long. I suppose i have them mounted correctly, with the belts witht the male tab on the pillar. I had a 71 el camino back in the day and it was like that. Could i get the length on these fro someone.

01-14-2015, 03:33 AM	#5
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,846	Re: Are these factory seatbelts? Need help identifying please The male end mounts to the pillar. Looks like length is 28" per post 17 in the thread below. http://67-72chevytrucks.com/vboard/s...d.php?t=455323

01-14-2015, 05:28 PM	#6
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Are these factory seatbelts? Need help identifying please Mine are about 40". I guess ill find an upholstery shop who can shorten and resew them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.