brake line identification help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mattwhiteyanks1 · 01-12-2015, 11:29 PM

I got my brake linespecially in from CPP. No diagram. No labels. Nothing. Can anyone help? I know the two on the right go to the master cylinder but I'm not certain from there. Nothing I've tried seems to fit quite right

**michael bustamante** · 01-12-2015, 11:52 PM

The line next to the master cyl lines goes along the crossmember. That sharp curve is wher the line wraps to the outside of the frame

**michael bustamante** · 01-12-2015, 11:54 PM

Quote:

Originally Posted by michael bustamante

The line next to the master cyl lines goes along the crossmember. That sharp curve is wher the line wraps to the outside of the frame

Did you order 71-72 disk brake lines or 73+? Also do you still have you brake line retainers?

mattwhiteyanks1 · 01-12-2015, 11:54 PM

Alright we'll give it a shot. It's just occurred b to me, I don't believe I have banjo bolts and the soft lines only came with 1 clip each. I need two. One top. And one bottom

mattwhiteyanks1 · 01-13-2015, 12:00 AM

Well I guess this is right but I don't like it.

mattwhiteyanks1 · 01-13-2015, 12:02 AM

Easier to see right side up I guess

**michael bustamante** · 01-13-2015, 01:32 PM

yup thats right. it links to the rear brakes. there should be another one that goes along the same route that links to your front brakes. they will most likely route under the engine stands

**michael bustamante** · 01-13-2015, 01:37 PM

pm me a reminder and ill e mail you a pic of my routed lines

**michael bustamante** · 01-13-2015, 10:44 PM

Heres driver side

**michael bustamante** · 01-13-2015, 10:53 PM

Heres driver side

**michael bustamante** · 01-13-2015, 10:54 PM

Front

**michael bustamante** · 01-13-2015, 10:56 PM

Passenger side you can see where the line goes to the rear brakes

**michael bustamante** · 01-15-2015, 03:39 PM

did these help you out any?

mattwhiteyanks1 · 01-15-2015, 04:10 PM

Quote:

Originally Posted by michael bustamante

did these help you out any?

Yeah, these helped a lot. I've actually just decided to bend my own lines. The prebent lines just don't work out like I want them. Thanks for the help

**michael bustamante** · 01-15-2015, 04:13 PM

i hear that alot! i pulled a set from a 72 half ton and copied those

mattwhiteyanks1 · 01-15-2015, 04:18 PM

I'm using the S.U.R&R brake line kit. Their products are top notch and, there's no comparison when it comes to ease of installation. Easy to bend by hand. Won't kink. I've been finishing up my radiator support and dual fan set up the last day or two.

01-12-2015, 11:29 PM	#1
mattwhiteyanks1 Registered User Join Date: Dec 2014 Location: maryville tn Posts: 94	brake line identification help I got my brake linespecially in from CPP. No diagram. No labels. Nothing. Can anyone help? I know the two on the right go to the master cylinder but I'm not certain from there. Nothing I've tried seems to fit quite right Attached Images

01-12-2015, 11:52 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help The line next to the master cyl lines goes along the crossmember. That sharp curve is wher the line wraps to the outside of the frame __________________ 1967custom

01-12-2015, 11:54 PM	#4
mattwhiteyanks1 Registered User Join Date: Dec 2014 Location: maryville tn Posts: 94	Re: brake line identification help Alright we'll give it a shot. It's just occurred b to me, I don't believe I have banjo bolts and the soft lines only came with 1 clip each. I need two. One top. And one bottom

01-13-2015, 12:00 AM	#5
mattwhiteyanks1 Registered User Join Date: Dec 2014 Location: maryville tn Posts: 94	Re: brake line identification help Well I guess this is right but I don't like it. Attached Images

01-13-2015, 12:02 AM	#6
mattwhiteyanks1 Registered User Join Date: Dec 2014 Location: maryville tn Posts: 94	Re: brake line identification help Easier to see right side up I guess Attached Images

01-13-2015, 01:32 PM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help yup thats right. it links to the rear brakes. there should be another one that goes along the same route that links to your front brakes. they will most likely route under the engine stands __________________ 1967custom

01-13-2015, 01:37 PM	#8
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help pm me a reminder and ill e mail you a pic of my routed lines __________________ 1967custom

01-13-2015, 10:44 PM	#9
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help Heres driver side Attached Images __________________ 1967custom

01-13-2015, 10:53 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help Heres driver side Attached Images __________________ 1967custom

01-13-2015, 10:54 PM	#11
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help Front Attached Images __________________ 1967custom

01-13-2015, 10:56 PM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help Passenger side you can see where the line goes to the rear brakes Attached Images __________________ 1967custom

01-15-2015, 03:39 PM	#13
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help did these help you out any? __________________ 1967custom

01-15-2015, 04:13 PM	#15
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: brake line identification help i hear that alot! i pulled a set from a 72 half ton and copied those __________________ 1967custom

01-15-2015, 04:18 PM	#16
mattwhiteyanks1 Registered User Join Date: Dec 2014 Location: maryville tn Posts: 94	Re: brake line identification help I'm using the S.U.R&R brake line kit. Their products are top notch and, there's no comparison when it comes to ease of installation. Easy to bend by hand. Won't kink. I've been finishing up my radiator support and dual fan set up the last day or two.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.