|
01-18-2015, 07:23 PM
|
#1 |
|
Registered User
Join Date: Oct 2014
Location: Gulfport Ms.
Posts: 27
|
Flwheel
I am swapping from a 250 six cylinder that has a three speed manual transmission to a 350. Will my existing flywheel work on the 350? If not what flywheel should I search for ?
__________________
We make too many wrong mistakes..................Yogi Berra |
|
|
|
01-19-2015, 08:13 AM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: sydney australia
Posts: 56
|
Re: Flwheel
i did this on a 78 c20 i had to alter the size of the crankshaft mounting bolt holes but it works well
(i cut some steel tube inserts to step the 6 cylinder 9/16 holes down to the 1/2in small block holes and used arp bolts) |
|
|
|
|
01-19-2015, 08:51 AM
|
#3 |
|
Senior Member
 Join Date: Jul 2014
Location: Indy, IN
Posts: 634
|
Re: Flwheel
I did the same swap and everything bolted right up.
__________________
Andrew 1953 3100 292 T5 1985 K5 Blazer 350 700R4 208 |
|
|
|
|
01-19-2015, 11:33 AM
|
#4 |
|
Registered User
Join Date: Oct 2014
Location: Spearfish South Dakota
Posts: 407
|
Re: Flwheel
I swaped a 250 six in a 65 panel the 396 was lunched fly wheel off the big block bolted right up. Thats one things that make chevy great.
|
|
|
|
|
01-19-2015, 02:57 PM
|
#5 |
|
Roadside Rebuilder
Join Date: Oct 2008
Location: Southeast Portland, OR
Posts: 421
|
Re: Flwheel
Here's a handy reference: http://www.hemmings.com/hmn/stories/...feature29.html
|
|
|
|
|
01-19-2015, 04:32 PM
|
#6 |
|
Registered User
Join Date: Aug 2013
Location: Banks, OR
Posts: 497
|
Re: Flwheel
I have a 454 flexplate on my 250 six (with the balance weight removed, of course...).
|
|
|
|
|
01-20-2015, 09:43 AM
|
#7 |
|
Registered User
Join Date: Sep 2014
Location: Texas
Posts: 215
|
Re: Flwheel
'86 and newer one peice rear seal engines changed bolt circle diameter.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
