Parts Geek - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RANDY COX · 01-17-2015, 05:13 PM

http://www.partsgeek.com/ anybody tried these parts....a fender for 170...

Jeff La · 01-17-2015, 08:05 PM

shipping is over $100 for each fender

**TJ's Chevy** · 01-17-2015, 10:22 PM

Looks like a good place.

Monte's62 · 01-17-2015, 11:02 PM

I have never bought anything for our 60-66 trucks through parts geek, but I buy everything for all of mine and my families other cars. They are usually very competitive on price, and the parts seem to be good quality and it arrives when it is supposed too.

Rockit · 01-17-2015, 11:08 PM

I just received a box of parts from them acouple of days ago. It was suspention parts, got them on today. Pretty happy with price and quality.

RANDY COX · 01-18-2015, 08:24 AM

I knew this was toooo good they want 129.00 for shipping, are they outta there minds...

Jeff La · 01-18-2015, 11:17 AM

Quote:

Originally Posted by RANDY COX

I knew this was toooo good they want 129.00 for shipping, are they outta there minds...

I was fixing to order until I saw shipping.

**bhc41051** · 01-18-2015, 12:30 PM

Hey Randy, I think the bottom line with the reproduction fenders is you're going to spend $500 bucks (with shipping) just to be disappointed. If I had it to do all over again I'd repair my old OEM fenders with these American made patch panels. http://www.autobodyspecialt.com/cgi-...&category=0123 My K10 will be a work truck so I'm Okay (well kinda) with the crappy fit.

RANDY COX · 01-18-2015, 08:06 PM

Quote:

Originally Posted by bhc41051

Hey Randy, I think the bottom line with the reproduction fenders is you're going to spend $500 bucks (with shipping) just to be disappointed. If I had it to do all over again I'd repair my old OEM fenders with these American made patch panels. http://www.autobodyspecialt.com/cgi-...&category=0123 My K10 will be a work truck so I'm Okay (well kinda) with the crappy fit.

WOW that's off a lot I bet you were disappointed, Did you pre-check the fit before painting, or paint then discover that it didn't fit... I had to adjust my rockers when I got them.... I guess I was looking for an easy way out than to cut and patch everything but I may have to......BTW I like your truck..

61K10 · 01-19-2015, 02:30 PM

Randy-- mine on the drivers side also was off some, not as bad as bhc's. In my case the rad support was part of the problem. I was able to pull the rad support back in line. I had to cut my pass fender at the rear support and re-weld it. I had 2 different brands of fenders (the name on the boxes were different) Wish you were closer as i have 4 fenders that can be fixed. I stared to fix one and then decided to go the new repo's. If you do fix yours and the bottom of the rear support is rusty don't try to replace the whole support. cut just the bottom off and weld the new support piece back on.

RANDY COX · 01-19-2015, 05:37 PM

61K10 thanks for the heads up on fenders, Yea I wish I did live closer. I prolly will repair mine as it will save me a few Hundred. Might have to rename my truck to PATCHES.. I'm sure there are people closer to you that prolly could use some fenders.. Hate to here all the issues your having with your truck.. I haven't really driven mine other than a little test drive, so I hope once I get it on the road that I don't have the issues your having..
But that's in the FAAAAAAAAAAAAAAARRRRRR future... I'm afraid...

61K10 · 01-20-2015, 02:03 PM

You will always have some small problems after a complete rebuild. Like i said in my build every time i try to save some $$$ I end up doing things twice. I should have rebuilt my trans as everything else was. good luck on your fenders.

**TJ's Chevy** · 01-20-2015, 02:56 PM

I found the best way was to find a good parts truck or just look for OEM parts. The black fenders on my 66 came off my 64 and will need a bit of mods to line the bolt holes up....and a small patch for each and I'm done...and it won't cost $500 to do that either. lol $500 towards nitrous!

MitchFloyd · 01-20-2015, 06:10 PM

Randy, I did mine with the patch replacement system. I'll have to let you know how the linement fits. Just cut and weld. By the measurement it should line back up..

MitchFloyd · 01-20-2015, 06:14 PM

Oh, yeah.. The patches came from Top Bananna. The thickness and form was spot on. But if you order from them don't expect confirmation or tracking #'s. Just be patient and they'll arrive somehow...

61K10 · 01-21-2015, 01:13 PM

Good job Mitch---Randy--see how Mitch did the inner brace, thats what i was trying to say. the top part of the brace really doesn't want to come off easy and usually in good shape. to many spot welds around the top.

01-17-2015, 05:13 PM	#1
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Parts Geek http://www.partsgeek.com/ anybody tried these parts....a fender for 170... __________________ 1964 BBC 402 4x4

01-17-2015, 08:05 PM	#2
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Parts Geek shipping is over $100 for each fender

01-17-2015, 10:22 PM	#3
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Parts Geek Looks like a good place. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-17-2015, 11:02 PM	#4
Monte's62 Registered User Join Date: Dec 2013 Location: Dallas Ga Posts: 308	Re: Parts Geek I have never bought anything for our 60-66 trucks through parts geek, but I buy everything for all of mine and my families other cars. They are usually very competitive on price, and the parts seem to be good quality and it arrives when it is supposed too.

01-17-2015, 11:08 PM	#5
Rockit Registered User Join Date: Oct 2009 Location: Price, Utah Posts: 68	Re: Parts Geek I just received a box of parts from them acouple of days ago. It was suspention parts, got them on today. Pretty happy with price and quality.

01-18-2015, 08:24 AM	#6
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Parts Geek I knew this was toooo good they want 129.00 for shipping, are they outta there minds... __________________ 1964 BBC 402 4x4

01-18-2015, 12:30 PM	#8
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: Parts Geek Hey Randy, I think the bottom line with the reproduction fenders is you're going to spend $500 bucks (with shipping) just to be disappointed. If I had it to do all over again I'd repair my old OEM fenders with these American made patch panels. http://www.autobodyspecialt.com/cgi-...&category=0123 My K10 will be a work truck so I'm Okay (well kinda) with the crappy fit. Attached Images

01-19-2015, 02:30 PM	#10
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Parts Geek Randy-- mine on the drivers side also was off some, not as bad as bhc's. In my case the rad support was part of the problem. I was able to pull the rad support back in line. I had to cut my pass fender at the rear support and re-weld it. I had 2 different brands of fenders (the name on the boxes were different) Wish you were closer as i have 4 fenders that can be fixed. I stared to fix one and then decided to go the new repo's. If you do fix yours and the bottom of the rear support is rusty don't try to replace the whole support. cut just the bottom off and weld the new support piece back on. __________________ 1961 chevy K10 my build is------------61K10 build

01-19-2015, 05:37 PM	#11
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: Parts Geek 61K10 thanks for the heads up on fenders, Yea I wish I did live closer. I prolly will repair mine as it will save me a few Hundred. Might have to rename my truck to PATCHES.. I'm sure there are people closer to you that prolly could use some fenders.. Hate to here all the issues your having with your truck.. I haven't really driven mine other than a little test drive, so I hope once I get it on the road that I don't have the issues your having.. But that's in the FAAAAAAAAAAAAAAARRRRRR future... I'm afraid... __________________ 1964 BBC 402 4x4

01-20-2015, 02:03 PM	#12
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Parts Geek You will always have some small problems after a complete rebuild. Like i said in my build every time i try to save some $$$ I end up doing things twice. I should have rebuilt my trans as everything else was. good luck on your fenders. __________________ 1961 chevy K10 my build is------------61K10 build

01-20-2015, 02:56 PM	#13
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Parts Geek I found the best way was to find a good parts truck or just look for OEM parts. The black fenders on my 66 came off my 64 and will need a bit of mods to line the bolt holes up....and a small patch for each and I'm done...and it won't cost $500 to do that either. lol $500 towards nitrous! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-20-2015, 06:10 PM	#14
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: Parts Geek Randy, I did mine with the patch replacement system. I'll have to let you know how the linement fits. Just cut and weld. By the measurement it should line back up.. __________________ '62 Chevy K10

01-20-2015, 06:14 PM	#15
MitchFloyd Registered User Join Date: Feb 2013 Location: Dallas, Tx Posts: 286	Re: Parts Geek Oh, yeah.. The patches came from Top Bananna. The thickness and form was spot on. But if you order from them don't expect confirmation or tracking #'s. Just be patient and they'll arrive somehow... __________________ '62 Chevy K10

01-21-2015, 01:13 PM	#16
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Parts Geek Good job Mitch---Randy--see how Mitch did the inner brace, thats what i was trying to say. the top part of the brace really doesn't want to come off easy and usually in good shape. to many spot welds around the top. __________________ 1961 chevy K10 my build is------------61K10 build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.