Interchangeable parts from C50? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BlueBullet** · 01-24-2015, 12:00 PM

What parts if any will work on our trucks?
Thanks
Nathan

Coley · 01-24-2015, 01:13 PM

To my recollection...everything in the cab...including the doors.
The dash bezel won't fit without modification but most gauges are re-usable and common.
Coley

gipper · 01-24-2015, 03:46 PM

Quote:

Originally Posted by BlueBullet

What parts if any will work on our trucks?
Thanks
Nathan

I actually found a perfect steering wheel in one.

**BlueBullet** · 01-24-2015, 04:14 PM

Going to look at one now buying for the doors and a few other stuff I' am going to part out the rest. Not sure how I'm going to go about fixing the corners of the doors though.
Thanks
Nathan

**WIDESIDE72** · 01-24-2015, 04:58 PM

I have swapped numerous tach dashes from big gas trucks into c10s. Diesel tachs are different though. Not sure about the comment above.

**BlueBullet** · 01-24-2015, 06:52 PM

does anybody know if the cab itself is the same if not what the differences are? Can it be modified to work?

**DaHos** · 01-24-2015, 07:51 PM

Entire firewall/cowl area down to the rockers is different, there is no lower "A" pillar , the front floor section and kick panels are also different. .....

The column mount and pedal box is different and some of the heater box is slightly different.

**BlueBullet** · 01-24-2015, 08:01 PM

K thanks for the information

Nathan

57larry · 01-24-2015, 08:47 PM

are the steering columns the same?

**LockDoc** · 01-25-2015, 01:22 AM

-
Friend of mine and I put a complete floor out of a C-50 in his 4x4. Just had to make a couple of modifications to the front corners and the hump area where it meets the toe board. Here is the thread on it:

http://67-72chevytrucks.com/vboard/s...d.php?t=490272

They are usually in good shape.

LockDoc

**BlueBullet** · 01-25-2015, 01:28 AM

LockDoc do you know of any threads that show how to fab corners for the doors from a C50. Thanks for the information
Nathan

**LockDoc** · 01-25-2015, 12:12 PM

Quote:

Originally Posted by BlueBullet

LockDoc do you know of any threads that show how to fab corners for the doors from a C50. Thanks for the information
Nathan

Don't know of anything on the board. I have a set I am going to do but it won't be for a while. I plan on doing an inner and outer piece for strength and peeling the outer skin up an inch or so so that the new outer skin can be crimped around the original inner panel. That should give it plenty of strength.

LockDoc

01-24-2015, 12:00 PM	#1
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Interchangeable parts from C50? What parts if any will work on our trucks? Thanks Nathan __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

01-24-2015, 01:13 PM	#2
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Interchangeable parts from C50? To my recollection...everything in the cab...including the doors. The dash bezel won't fit without modification but most gauges are re-usable and common. Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

01-24-2015, 04:14 PM	#4
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Interchangeable parts from C50? Going to look at one now buying for the doors and a few other stuff I' am going to part out the rest. Not sure how I'm going to go about fixing the corners of the doors though. Thanks Nathan __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

01-24-2015, 04:58 PM	#5
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: Interchangeable parts from C50? I have swapped numerous tach dashes from big gas trucks into c10s. Diesel tachs are different though. Not sure about the comment above.

01-24-2015, 06:52 PM	#6
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Interchangeable parts from C50? does anybody know if the cab itself is the same if not what the differences are? Can it be modified to work? __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

01-24-2015, 07:51 PM	#7
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: Interchangeable parts from C50? Entire firewall/cowl area down to the rockers is different, there is no lower "A" pillar , the front floor section and kick panels are also different. ..... The column mount and pedal box is different and some of the heater box is slightly different. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations Last edited by DaHos; 01-24-2015 at 07:58 PM.

01-24-2015, 08:01 PM	#8
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Interchangeable parts from C50? K thanks for the information Nathan __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

01-24-2015, 08:47 PM	#9
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: Interchangeable parts from C50? are the steering columns the same?

01-25-2015, 01:22 AM	#10
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,393	Re: Interchangeable parts from C50? - Friend of mine and I put a complete floor out of a C-50 in his 4x4. Just had to make a couple of modifications to the front corners and the hump area where it meets the toe board. Here is the thread on it: http://67-72chevytrucks.com/vboard/s...d.php?t=490272 They are usually in good shape. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-25-2015, 01:28 AM	#11
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Interchangeable parts from C50? LockDoc do you know of any threads that show how to fab corners for the doors from a C50. Thanks for the information Nathan __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.