1bbl rochester 6 cyl. carb FS- rebuilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 01-27-2004, 02:43 PM

$50.00 plus shipping. Please respond here.

**phase_one** · 01-27-2004, 02:52 PM

What year and size engine did it come off?

HuggerCST · 01-27-2004, 03:12 PM

Not sure. I got this with a group of parts, and there was no box. 1 & 3/4 bore, 2 & 5/8 air cleaner base, manuel choke. Looks like it takes a 5/16 fuel line, and a 3/16 metal vacuum line to the dist. I don't see any numbers on it.

HuggerCST · 01-28-2004, 12:04 AM

ttt

**67sss** · 01-28-2004, 12:39 AM

more pics..other side, top..are there any #'s on it? I need one for my 70 -250 want to make sure it will work.
Thanks.

HuggerCST · 01-28-2004, 12:48 PM

1

HuggerCST · 01-28-2004, 12:48 PM

2

HuggerCST · 01-28-2004, 12:53 PM

I can't find any numbers, but I would bet that this carb is for 67-72 230s and 250s. I think the 292s had a bigger one. It's been a while, but I have worked on them before, and if my memory is correct, this is it. I got this with a pile of 67-72 chevy truck parts.

HuggerCST · 01-28-2004, 12:54 PM

3

Brad · 01-28-2004, 03:32 PM

This is a Rochester B carb. It was used on 67's. 68's on up had the Rochester MV style carb which were more square-ish in shape.

HuggerCST · 01-28-2004, 03:57 PM

Thanks for the info, Brad. I knew it was just a matter of time before someone figured it out. I showed it to a parts dealer a few minutes ago, and he said the same, pre '68. I would think that it would still work on later models, but not sure.

**67sss** · 01-28-2004, 05:10 PM

How's a guy suppose to know if it'll work on diff year 6's.

Brad · 01-29-2004, 01:32 PM

This carb uses a rod linkage so you couldn't use it with the cable style linkage unless you swapped it out.

stelth2002 · 01-29-2004, 02:33 PM

looks like a 292 card, they had the bigger bore. i coould be wrong though. the carbs are enterchangable.

Brad · 01-29-2004, 04:03 PM

There was only one size for these carbs. It'll fit a 292, 250, or 230 but it all depends on the linkage you've got.

01-27-2004, 02:43 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	1bbl rochester 6 cyl. carb FS- rebuilt $50.00 plus shipping. Please respond here. Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-27-2004, 02:52 PM	#2
phase_one Registered User Join Date: Jul 2001 Location: Praireville. LA 70769 Posts: 390	What year and size engine did it come off? __________________ 11 Surbaban 70 C 10 still in progress

01-27-2004, 03:12 PM	#3
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Not sure. I got this with a group of parts, and there was no box. 1 & 3/4 bore, 2 & 5/8 air cleaner base, manuel choke. Looks like it takes a 5/16 fuel line, and a 3/16 metal vacuum line to the dist. I don't see any numbers on it. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 12:04 AM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	ttt __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 12:39 AM	#5
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	carb more pics..other side, top..are there any #'s on it? I need one for my 70 -250 want to make sure it will work. Thanks.

01-28-2004, 12:48 PM	#6
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	1 Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 12:48 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	2 Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 12:53 PM	#8
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I can't find any numbers, but I would bet that this carb is for 67-72 230s and 250s. I think the 292s had a bigger one. It's been a while, but I have worked on them before, and if my memory is correct, this is it. I got this with a pile of 67-72 chevy truck parts. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 12:54 PM	#9
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	3 Attached Images __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 03:32 PM	#10
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	This is a Rochester B carb. It was used on 67's. 68's on up had the Rochester MV style carb which were more square-ish in shape. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-28-2004, 03:57 PM	#11
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Thanks for the info, Brad. I knew it was just a matter of time before someone figured it out. I showed it to a parts dealer a few minutes ago, and he said the same, pre '68. I would think that it would still work on later models, but not sure. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-28-2004, 05:10 PM	#12
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	How's a guy suppose to know if it'll work on diff year 6's.

01-29-2004, 01:32 PM	#13
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	This carb uses a rod linkage so you couldn't use it with the cable style linkage unless you swapped it out. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-29-2004, 02:33 PM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	looks like a 292 card, they had the bigger bore. i coould be wrong though. the carbs are enterchangable. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

01-29-2004, 04:03 PM	#15
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	There was only one size for these carbs. It'll fit a 292, 250, or 230 but it all depends on the linkage you've got. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.