|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-03-2015, 10:25 PM
|
#1 |
|
Registered User
Join Date: Mar 2013
Location: Peachtree Corners, GA
Posts: 84
|
Wiring help for Engine Coolant temp
So I bought a used harness from a guy. I am trying to sort out the wirings. Well for some reason the ECT (engine coolant temp) was missing. I went to a junk yard and found a plug. My question is. I have identified the pin 74 from the blue connector c1 as the yellow wire (that is the ECT sensor signal). Where does the black wire goes?
Does the black wire go to ground? I can't find any pin on both the blue and red connector for the black wire of the ECT. This is a 2001 truck harness. |
|
|
|
02-03-2015, 11:43 PM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: Wiring help for Engine Coolant temp
It goes to "low reference" pin 80, it's a gray wire.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
02-04-2015, 09:06 AM
|
#3 |
|
Registered User
Join Date: Mar 2013
Location: Peachtree Corners, GA
Posts: 84
|
Re: Wiring help for Engine Coolant temp
Thanks Ls1nova71..I actually found a low reference wire that goes no where.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
