how much to lay 22's on 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy_68 · 01-12-2004, 02:18 AM

how much would i have to notch the rear to lay my 67 on 22's. I was thinking around 10 inch. but just want to be sure. Thanx

Truckhead · 01-25-2004, 12:34 AM

Better make it 20. LOL

smashingchuck · 01-25-2004, 03:43 PM

According to my calculations (and this is for a truck with a mustang II so it will sit much lower than a "normal" truck) I'm going to need all of 11" to lay out on rubber bands. I'm getting a 12" notch.

**N2TRUX** · 01-25-2004, 10:53 PM

What "size" 22 are you talking about running? It would help to know to get an idea of actual tire height....

98L150 · 01-29-2004, 02:02 AM

Here is a pic of a 70 cut to the doors with 20's that laysout hard. I have seen this truck in person seveal times in person when in AZ and Cali. Put what ever size you want but the key to me is to still be able to drive and have full turning at a slammed ride height with out have the air up your ride to a getto ride. if custom did this truck and have several photo's of it in process. With 22's you need to whatch the upper body line to make sure you get off set wheels to set in far enough to not have teh tire rub the inside of the body panel when layed out or driving low.

pic to big to post here is the link: http://www.socalcustoms.com/Shows/20...s/DSC00338.htm

fastbagged68 · 01-30-2004, 06:24 PM

I'm doing an 11inch notch with 20's - 295-40-20= 29.5 inches tall

01-12-2004, 02:18 AM	#1
Chevy_68 Registered User Join Date: Mar 2002 Location: PHX Az Posts: 155	how much to lay 22's on 67 how much would i have to notch the rear to lay my 67 on 22's. I was thinking around 10 inch. but just want to be sure. Thanx

01-25-2004, 03:43 PM	#3
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	According to my calculations (and this is for a truck with a mustang II so it will sit much lower than a "normal" truck) I'm going to need all of 11" to lay out on rubber bands. I'm getting a 12" notch. __________________ 78 Build Thread 4Runner Build

01-25-2004, 10:53 PM	#4
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	What "size" 22 are you talking about running? It would help to know to get an idea of actual tire height.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

01-29-2004, 02:02 AM	#5
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	70 cut to the doors with 20's Here is a pic of a 70 cut to the doors with 20's that laysout hard. I have seen this truck in person seveal times in person when in AZ and Cali. Put what ever size you want but the key to me is to still be able to drive and have full turning at a slammed ride height with out have the air up your ride to a getto ride. if custom did this truck and have several photo's of it in process. With 22's you need to whatch the upper body line to make sure you get off set wheels to set in far enough to not have teh tire rub the inside of the body panel when layed out or driving low. pic to big to post here is the link: http://www.socalcustoms.com/Shows/20...s/DSC00338.htm

01-25-2004, 12:34 AM	#2
Truckhead 18436572 Join Date: Aug 2003 Location: Waynesboro, Va. Posts: 488	Better make it 20. LOL

01-30-2004, 06:24 PM	#6
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I'm doing an 11inch notch with 20's - 295-40-20= 29.5 inches tall



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.